Descargar Imprimir esta página

Product Specifications - Hitachi P 13F Manual De Instrucciones

Ocultar thumbs Ver también para P 13F:

Publicidad

Idiomas disponibles

Idiomas disponibles

Some dust created by power sanding, sawing, grinding, drilling and other construction activities contains
chemicals known to the state of California to cause cancer, birth defects or other reproductive harm. Some
examples of these chemicals are:
• Lead based paints
• Crystalline silica from bricks, cement and other masonry products
• Arsenic and chromium from chemically treated lumber
Your risk from these exposures varies, depending on how often you do this type of work. To reduce your
exposure to these chemicals, work in a well-ventilated area and work with approved safety equipment, such
as dust masks that are specially designed to filter out microscopic particles.

PRODUCT SPECIFICATIONS

13" (330mm) PLANER
.............................................................................................................................................................
Voltage
Watts .................................................................................................................................................................
Amps .................................................................................................................................................................
.............................................................................................................................................
Max cutting width
...............................................................................................................................................
Thickness of cut
.....................................................................................................................................
Maximum depth of cut
......................................................................................................................................................
Feed speed
..............................................................................................................................................
Number of blade
.................................................................................................................................................
No load Speed
...............................................................................................................................................................
Weight
The noise levels of this machine during operating are as follows:
maximum sound pressure level: 100.2 dB(A)
maximum sound power level:
To avoid electrical hazards, fire hazards or damage to the planer, use proper circuit protection.
This planer is wired at the factory for 230 Volt operation. It must be connected to a 230 Volt / 8 Ampere time
delay fuse or circuit breaker. To avoid shock or fire, replace power cord immediately if it is worn, cut or
damaged in any way.
Before using your planer, it is critical that you read and understand these safety rules. Failure to follow these
rules could result in serious injury to you or damage to the planer.
Wear safety goggles
Wear ear protection
Wear a breathing mask
WARNING
Noise can be a health hazard. When the noise level
exceeds 85dB(A), be sure to wear ear protection.
WARNING
112 dB(A)
WARNING
– 3 –
ENVIRONMENTAL PROTECTION
Recycle unwanted materials instead of
disposing of them as waste. All tools,
hoses and packaging should be sorted,
taken to the local recycling center and
disposed of in an environmentally safe
way.
English
230V / 50Hz
1800W
8A (230V)
330mm
13" (
)
(3.2mm)
Min. 1/8"
2.4mm
3/32" (
)
0.12 m/s
2
min
-1
9,250
101.4 lbs (46kg)

Publicidad

loading