Info Menu; Standard Menu - FTE Maximal GENIUS ICT Manual De Uso

2.5.- Info Menu

This menu shows the information about the Hardware version (HW ver.) and
firmware (SW ver.) which with the equipment is provided.
Press CANCEL to go back to previous menu.

2.6.- Standard Menu

From v1.7.19 version of PRO 200, v1.8.15 of PRO 201 and serial number: 0920XXXX of Genius amplifiers, the
"Standard" option has been added in the main menu of Genius amplifiers.
This option allows selecting the modulation Standard of the amplifier. Options:
CH 8 ( 8 MHz bandwidth) and CH 7 (7 MHz bandwidth)
The CH 7 standard configures a channel list that is based on the Australian
Standard; it should be activated only if you want to distribute the signal under
this standard. For this reason it is not recommended to change the modulation
standard configured by default (CH8).
By changing this option, a change in the output channel list of the amplifier will
be made and the process can take several minutes. Please do not disconnect
the programmer until the whole process is finished.
Reserved for technical modifications and/or errors
User's Manual · Genius
11
- -
GENIUS ICT
Inputs Back-up
Prog CH >Info<
Auto Standard
GENIUS ICT
HW ver.: GENIUS ICT
SW ver.: v.7c50
Serial : 65535655
GENIUS ICT
Inputs Back-up
Prog CH Info
Auto >Standard<
GENIUS ICT
>CH 7 MHz<
CH 8 MHz
Genius Version en_1.5 FTE maximal