Available Spare Parts - FLAEM Ghibli Plus Manual De Instrucciones

Ocultar thumbs

Contenido

Tabla de contenido

Idiomas disponibles

- Completely immerse each part in the solution, taking care to avoid the formation

of air bubbles on the parts. Leave the parts immersed for the amount of time in-

dicated on the packaging of the disinfectant associated with the concentration

chosen for the solution.

- Remove the disinfected parts and rinse abundantly with warm potable water.

- Dispose of the solution following the instructions provided by the disinfectant

manufacturer.

method B: Sanitise the accessories C1.1-C1.2-C1.3-C1.4-C2-C3-C4 by boiling them

in water for 10 minutes; use demineralised or distilled water to prevent calcium de-

posits.

method C: Sanitise the accessories C1.1-C1.2-C1.3-C1.4-C2-C3-C4 with a hot

steam steriliser for baby-bottle (not the microwave type). Perform the process faith-

fully following the instructions of the steriliser. To ensure that the disinfection is ef-

fective, choose a steriliser with an operating cycle of at least 6 minutes.

After having disinfected the accessories, shake them vigorously and place them

on a paper towel. Alternatively, dry them with a jet of hot air (for example, from a

hair dryer).

At the end of each use store the device complete with accessories in a dry place

away from dust.

AIR FILTERING

The unit is equipped with an air filter (A3) which should be

replaced when dirty or when its colour changes. To replace

the filter take it out by pulling it as shown in figure. The filter is

designed to remain fixed in its housing.

Do not replace the filter during use.

Only use original accessories and spare parts by Flaem,

we disclaim any liability in the event of using non original

spare parts or accessories.