To reduce the level of the vocals in a song
1
Press the M.C. dial to display the main menu.
2
Turn the M.C. dial to select [MICROPHONE] then press to confirm.
3
Turn the M.C. dial to select [VOCAL].
4
Press the M.C. dial to select [OFF].
NOTE
Depending on the recording condition of songs, the level of vocals may not be reduced effectively.
Audio Adjustments
(Network mode is only available for FH-S725BT.)
You can also make various adjustments in the AUDIO settings (page 29).
Operation modes
This unit features two operation modes: network mode and standard mode. You can
switch between modes as desired (page 10).
Network mode
You can create a 2-way + SW multi-amp and multi-speaker system with high range
speaker, middle range speaker and subwoofer for reproduction of high, middle and low
frequencies (bands).
Standard mode
You can create a 4-speaker system with front and rear speakers or front speakers and
subwoofers, or a 6-speaker system with front and rear speakers and subwoofers.
Adjusting the cut-off frequency value and the slope
value
You can adjust the cut-off frequency value and the slope value of each speaker.
The following speakers can be adjusted.
Network mode:
[HIGH] (high-range speaker HPF), [MID HPF] (middle-range speaker HPF), [MID LPF]
(middle-range speaker LPF), [SUBWOOFER]
Standard mode:
[FRONT], [REAR], [SUBWOOFER]
- 26 -