Descargar Imprimir esta página

Lifetime STREAMLINE 90171 Instrucciones De Ensamblaje página 8

Ocultar thumbs Ver también para STREAMLINE 90171:

Publicidad

SECTION 1 (CONTINUED) /
TOOLS AND HARDWARE REQUIRED /
(2)
1.3
• Slide the Top Pole (ALH) far enough out of the Middle Pole (ALF) so
that it does not obstruct the holes at the bottom of the Middle
Pole. Then attach the hardware indicated in the location
shown.
• Tire el extremo de la Sección superior del poste (ALH) por la
Sección intermedia del poste (ALF) apenas lo sufi ciente para que
no obstruya los agujeros al extremo inferior de la Sección
intermedia. Entonces, sujete los accesorios indicados a la
ubicación illustrada.
• Tirez l'extrémité de la Section supérieure du poteau (ALH) de la
Section du milieu du poteau (ALF) suffi samment éloignée pour que
n'obstrue pas de trous à l'extrémité inférieure de la Section
du milieu. Ensuite, attachez les accessoires indiqués à
l'emplacement illustré.
ALH
ALF
AOM
AOL
SECCIÓN 1 (CONTINUACIÓN)
HERRAMIENTAS Y ACCESORIOS REQUERIDOS
AOL (x2)
!
WARNING
Do not overtighten the Cap Nut. If the end of
the Bolt breaks through the plastic cap, call our
Customer Service Department. Exposed threads
on the end of the Bolt may cause serious injuries.
!
AVERTISSEMENT
Ne pas serrer excessivement l'écrou à chape.
Si l'extrémité du boulon passe au travers du
chapeau en plastique, veuillez appeler le Service
clientèle. Si le filetage à l'extrémité du boulon est
exposé il peut causer des blessures graves.
!
ADVERTENCIA
No apretar demasiado la Tuerca ciega. Si el
extremo del Perno extiende por el plástico, llame
a nuestro Departamento de servicios a clientes.
Hilos expuestos podrían causar lesiones graves.
/
SECTION 1 (SUITE)
/
OUTILS ET ACCESSOIRES REQUIS
1.4
• Position the Top Pole (ALH) at its lowest
height and attach the Adjustment Knob (BFN)
to the Top Pole and Middle Pole (ALF) with
the hardware shown.
• Coloque el poste superior (ALH) a su altura
más baja y sujete la perilla de ajuste (BFN)
en el poste superior y el poste intermedio
(ALF) utilizando los artículos de ferretería
que se muestran.
• Rangez, ensuite, la Section de poteau
supérieure (ALH) à sa hauteur la plus faible
et fi xez le Bouton (BFN) à la Section de
poteau supérieure et la Section du milieu
(ALF) à l'aide des accessoires illustrés.
!
BFN
!
!
8
AOM (x1)
ALH
AOL
ALF

Publicidad

loading