wilux AQUATRONIC Manual De Instrucciones página 24

Function blower
Pressing repeatedly the key
will occupy the first position on the display and can be chosen pressing the key OK. On
the display you will now read:
BLOWER ON/OFF
If you choose ON the symbol
The default value will be blinking on the display. You can move from ON to OFF and back
pressing the keys @@ e @@. If you press OK when "OFF" is blinking, the blower will not
be activated and the submenu remains inhibited. If you press OK when "ON" is blinking,
then the blower will be activated and you have the possibility to enter the submenu
pressing the key @@. Afterwards you will read on the display:
SPEED: 1 - 2 - 3
and next
WAVE ON/OFF
Speed:
The default value will be blinking on the display. If you want to activate speed 2 press key
@@, when number 2 starts blinking press OK to memorize this speed immediately. The
procedure is the same for speed 1 and 3. In correspondence with the speed chosen the
led near the symbol @@
indicates speed 1, two led illuminated indicate speed 2, three led illuminated indicate
speed 3.
After memorizing the speed, press key
you will read:
WAVE ON/OFF
If you choose ON the symbol
The default value will be blinking on the display. To activate the WAVE effect of the blower,
press OK when ON blinks on the display.
Press the key@@ to return to the main menu.
Function light
Pressing repeatedly the key
occupy the first position on the display and can be chosen pressing the key OK. On the
display you will now read:
LIGHT ON/OFF
The default value will be blinking on the display. You can move from ON to OFF and back
pressing the keys @@ e @@. If you press OK when "ON" is blinking the light will be
switched on, otherwise it will remain switched off. Anyway the light will not function if there
is not enough water in the bathtub.
Press the key @@ to return to the main menu.
As an option it is possible to order a device for chromo therapy. The lamp is furnished as
an alternative to the standard one. Chromo therapy is a light therapy which uses colours
@@ you can move inside the menu until the word BLOWER
@@ will be illuminated on the infra-red receiver
on the infrared receiver will be illuminated. One led illuminated
@@ to pass on to the function wave. On the display
@@ will be illuminated on the infra-red receiver
@@ you can move inside the menu until the word LIGHT will
24