wilux AQUATRONIC Manual De Instrucciones página 25

to help the body and mind to find their natural equilibrium. Every colour has a special
effect on your health.
For further information about this function please consult page 28.
Disinfection cycle
ATTENTION:
BEFORE ACTIVATING THE DISINFECTION CYCLE ASSURE YOURSELF THAT THERE IS
ENOUGH DISINFECTION LIQUID IN THE TANK (LED @@ IS NOT ILLUMINATED)
Pressing repeatedly the key @@ you can move inside the menu until the word
DISINFECTION will occupy the first position on the display and can be chosen pressing
the key OK. On the display you will now read:
DISINFECTION YES/NO
If you choose YES the symbol @@ will be illuminated on the infra-red receiver.
The default value will be blinking on the display. You can move from YES to NO and back
pressing the keys @@ e @@. If you press OK when NO is blinking, the disinfection cycle
will not be activated. If you press OK for THREE TIMES ONE AFTER ANOTHER when YES
is blinking, the disinfection cycle will be activated. This is a security procedure to avoid
starting the program without warning.
The disinfection cycle may only be activated if nobody is using the bathtub.
Press the key @@ to return to the main menu.
Function program
Pressing repeatedly the key @@ you can move inside the menu until the word PROGRAM
will occupy the first position on the display and can be chosen pressing the key OK. On
the display you will now read:
NEW
If you press OK you will be able to select all functions of the submenu program (PUMP,
BLOWER, LIGHT, TIME, START) which can be memorized in a personalized program. You
can memorize the functions pump, blower and light following the same procedure used
up till now to activate these functions. If you press OK the function will not be activated
but memorized.
For example:
If you press OK after the visualization of NEW the first function which can be memorized
will be:
PUMP
Press OK again and the display will visualize:
PUMP ON/OFF
Press OK and you will memorize the function blinking on the display.
If you press OK when "ON" blinks, you will memorize the pump function and will have the
possibility to enter the submenu. If you press OK when "OFF" blinks you will memorize a
program without the use of the pump. The same procedure is valid for the functions
blower and light.
25