Setting Engine Speed; Stopping The Engine - Honda GXR120 Manual Del Propietário

6. Pull the starter grip lightly until you feel resistance, then pull
briskly in the direction of the arrow as shown below. Return the
starter grip gently.
Do not allow the starter grip to snap back against the engine.
Return it gently to prevent damage to the starter.
7. If the choke lever was moved to the CLOSED position to start
the engine, gradually move it to the OPEN position as the
engine warms up.
(Float type)
CHOKE LEVER
OPEN
(Diaphragm type)
CHOKE LEVER
OPEN
Direction to pull
STARTER GRIP
OPEN
OPEN
ENGLISH

SETTING ENGINE SPEED

Position the throttle lever for the desired engine speed.
For engine speed recommendations, refer to the instructions
provided with the equipment powered by this engine.
THROTTLE LEVER
(on the equipment)

STOPPING THE ENGINE

To stop the engine in an emergency, simply turn the engine switch
to the OFF position. Under normal conditions, use the following
procedure. Refer to the instructions provided by the equipment
manufacturer.
1. Move the throttle lever to the MIN. position.
THROTTLE LEVER
(on the equipment)
2. Turn the engine switch (applicable types) to the OFF position.
OFF
3. If the fuel tank is equipped with a fuel valve or a fuel filler cap
with a vent, turn them to the CLOSED or OFF position.
MIN.
MAX.
MIN.
OFF
ENGINE SWITCH
(applicable types)
5