Zipper Maschinen ZI-HS16E Manual De Instrucciones página 33

ZIPPER MASCHINEN GmbH
ZI-HS16E / ZI-HS22EZ / ZI-HS30Z / ZI-HS30EZ
www.Zipper-Maschinen.at
D. Removing the
control handles to retract the wedge ram. Remove
the support stand.
E. Mounting the guard arm: Align the hole and
locking pin of the guard arm with the mount
bracket. Secure the guard arm with a M10 × 40 hex
bolts, two washers and a nut from the hardware
bag.
F. Mounting the retaining hook: Position the
retaining hook onto the frame and secure with two
M10×35 hex bolts and nuts.
ASSEMBLY
support stand: Release both
33