Led Indication; Hysteresis Mode; Auto Hysteresis Value - CARLO GAVAZZI IO-Link PD30CTP R BP IO Serie Manual De Instrucciones

2.5.13. LED indication

The LED indication can be configured in 3 different modes: Inactive, Active or Find my sensor.
Inactive: The LEDs are turned off at all times
Active: The LEDs follow the indication scheme in 5.1.
Find my sensor: The LEDs are flashing alternating with 2Hz with 50% duty cycle in order to easily locate
the sensor.

2.5.14. Hysteresis mode

See 2.4.1.3. Hysteresis Settings

2.5.15. Auto hysteresis value

See 2.4.1.3. Hysteresis Settings
27
Rev.00 - 06 .2021 | MAN PD30CTP/R IO-Link EN | © 2021 | CARLO GAVAZZI Industri