Product Description - Bestway STEEL PRO 56447 Manual De Instrucciones

STEEL PRO™
OVAL FRAME POOLS
OWNER'S MANUAL

Product Description

Type Dimension
4.88 m x 3.05 m x 1.07 m Aboveground
#56447
(16' x 10' x 42'') swimming pool kit
Aboveground
5.49 m x 3.66 m x 1.22 m
#56460
swimming pool kit
(18' x 12' x 48'')
5.49 m x 3.66 m x 1.22 m Aboveground
#56461
(18' x 12' x 48'') swimming pool kit
WARNING
Carefully read, understand, and follow all information in this user manual before installing and using the swimming pool.
These warnings, instructions, and safety guidelines address some common risks of water recreation, but they cannot
cover all risks and dangers in all cases. Always use caution, common sense, and good judgment when enjoying any
water activity. Retain this information for future use.
Non Swimmers safety
- Continuous, active, and vigilant supervision of weak swimmers and non-swimmers by a competent adult is required at
all times (remembering that children under five are at the highest risk of drowning).
- Designate a competent adult to supervise the pool each time it is being used.
- Weak swimmers or non-swimmers should wear personal protection equipment when using the pool.
- When the pool is not in use, or unsupervised, remove all toys from the swimming pool and its surrounding to avoid
attracting children to the pool.
Safety devices
- In order to prevent children from drowning, it is recommended to secure the access to the pool with a protection
device. In order to prevent children climbing from the inlet and outlet valve, it is recommended to install a barrier (and
secure all doors and windows, where applicable) to prevent unauthorized access to the swimming pool.
- Barriers, pool covers, pool alarms, or similar safety devices are helpful aids, but they are not substitutes for continuous
and competent adult supervision.
Safety equipment
- It is recommended to keep rescue equipment (e.g. a ring buoy) by the pool.
- Keep a working phone and a list of emergency phone numbers near the pool.
Safe use of the pool
- Encourage all users especially children to learn how to swim
- Learn Basic Life Support (Cardiopulmonary Resuscitation - CPR) and refresh this knowledge regularly. This can make
a life-saving difference in the event of an emergency.
- Instruct all pool users, including children, what to do in case of an emergency
- Never dive into any shallow body of water. This can lead to serious injury or death.
- Do not use the swimming pool when using alcohol or medication that may impair your ability to safely use the pool.
- When pool covers are used, remove them completely from the water surface before entering the pool.
- Protect pool occupants from water related illnesses by keeping the pool water treated and practicing good hygiene.
Consult the water treatment guidelines in the user's manual.
- Store chemicals (e.g. water treatment, cleaning or disinfection products) out of the reach of children.
- Use the signage as outlined below. Signage is to be displayed in a prominent position within 2m of the pool.
Keep children under supervision in the aquatic environment. No diving.
- Removable ladders shall be placed on a horizontal surface.
- Irrespective of materials used for swimming pool construction, accessible surfaces have to be checked regularly to
avoid injuries.
- Regularly monitor bolts and screws. Remove splinters or any sharp edges to avoid injuries.
ATTENTION: Do not leave the drained pool outside. The empty pool is liable to become deformed and/or displaced
due to wind.
- If you have a filter pump, refer to the pump's manual for instructions.
WARNING! The pump cannot be used while people are inside the pool!
- If you have a ladder, refer to the ladder's manual for instructions.
WARNING! The use of a swimming pool implies compliance with the safety instructions described in the operating and
maintenance guide. In order to prevent drowning or other serious injuries, pay particular attention to the possibility of
unexpected access to the swimming pool by children under 5 years by securing the access to it, and, during the
bathing period, keep them under constant adult supervision.
Please read carefully and keep for future reference
Installation usually takes approximately 30 minutes with 2-3 people excluding earthworks and filling.
See below for part descriptions.
Components list:
NOTE: Some parts already have been installed on the pool.
Below parts are for all size of pool.
#02
#01
X1 X2
Underwater adhesive
Liner
repair patch
#F1B417
Kit Type Accessories
Filtration System
Pool Cover
Filtration System
Pool Cover
Filtration System
Pool Cover
#03 #04
X1 X1
Hose Adaptor Drain Valve Cap
#P6D1419(blue) #P6D1158 (blue)
Below parts are for steel frame
A
Top Rail A
E
Top Rail
Spring-Loaded Pin
Ladder
Ground Cloth NO.
Ladder
1 Liner
Ground Cloth
A Top Rail A
Ladder
B Top Rail B
Ground Cloth
C U-Support
D Top Rail Plug
E Top Rail Spring-loaded Pin
F U-Support Spring-loaded Pin
G U-Support Cap
Please see FAQ'S for additional information. Drawings not scaled to size.
CHOOSE THE CORRECT LOCATION
NOTE: The pool must be set up on a completely flat and level surface. Please do not install the pool if the
surface is inclined or sloped.
Correct conditions to set up the pool:
• The selected location has to be capable of uniformly supporting the weight for the entire time the pool is installed,
moreover the location must be flat and must be cleared of all objects and debris including stones and twigs.
• We recommend positioning the pool away from any objects children could use to climb into the pool.
NOTE: Position the pool near an adequate drainage system to deal with overflow or to discharge the pool.
Incorrect conditions to set up the pool:
• On uneven ground the pool may collapse causing serious personal injury and/or damage to personal property and will
void the warranty and prevent any service claims.
• Sand should not be used to create a level base; the ground must be dug out if necessary.
• Directly under overhead power lines or trees. Be sure the location does not contain underground utility pipes, lines or
cables of any kind.
• Do not set up the pool on driveways, decks, platforms, gravel or asphalt surfaces. The selected location should be firm
enough to withstand the pressure of the water; Nud, sand, soft / loose soil or tar are not suitable.
• Grass or other vegetation under the pool will die and may cause odors and slime to develop, therefore we recommend
removing all grass from the selected pool location.
• Avoid areas prone to aggressive plant and weed species that may grow through the ground cloth or liner.
NOTE: Check with your local city council for by-laws relating to fencing, barriers, lighting and safety requirements and
ensure you comply with all laws.
NOTE: If have a filter pump, refer to the pump's manual for instructions.
NOTE: The ladder must match the pool size and should to be used only for entering and exiting the pool. It is forbidden
to exceed the permitted payload of the ladder. Check regularly if the ladder is properly assembled.
Installation
Bestway Inflatables will not be responsible for damage caused to the pool due to mishandling or failure to follow these
instructions.
1. Lay out all parts and check that you have the correct quantities as listed in the components list. If you are missing any
part do not assemble the pool, contact Bestway Customers Service.
2. Spread out the pool and make sure the pool is right side up, let it sit exposed to direct sunlight for 1 hour or more so
that the pool is more flexible during set up.
3. Turn the pool so the drain valve is near the area where your plan to drain the water.
ATTENTION: Do not drag the pool on the ground in order to avoid puncturing from sharp objects.
NOTE: The base or bottom of the pool should be laid out properly (flat without wrinkles).
4. Insert the stopper plug into the inlet and outlet on the wall of the pool from the inside of the pool.
5. Slide Top Rail A into the pole sleeve at the top of the pool. Connect Top Rail B to Top Rail A: ensure the spring-loaded
pins snap into the pre-drilled holes. Be sure to line up the holes in the sleeves with the holes on the Top Rails.
Continue inserting the Top Rails into the other side of the pool. (See Fig. 1)
6. Install the U-supports; first insert the U-support through the Pole support at the bottom of the pools, then insert the
two ends of the U-Support into the exposed holes on the Top Rails. Complete one side before moving to the other side
of the pool. (See Fig. 2.1/2.2)
7. Inflate the top ring of the pool with an air pump (not included). Ensure the safety valve is closed securely after
inflation. (See Fig. 3)
ATTENTION: Do not use high pressure air hose or over inflate the top ring, it should be slightly stiff to the touch.
NOTE: Hot temperatures cause air to expand the ring and may cause damage. Leave some room for expansion.
Please see FAQ's for additional information.
8. Ensure drain valve is firmly closed.
9. Put 1" to 2" water in the pool to cover the floor. Once pool floor is slightly covered, gently smooth out all wrinkles.
Start in the center of the pool and work your way clockwise to the outside.
Fig. 1
Fig. 2.2
#05
X2
Stopper
#P6D1418(blue)
5
B C
Top Rail B U-Support
F G
U-Support
U-Support Cap
Spring-loaded Pin
#56447
Name
Qty Spare Part NO.
1 56269ASS17
2 P61046
2 P61047
4 P61086
4 P61043
2 P61042
8 P61045
8 P61044
Fig. 2.1
Fig. 3
D
Top Rail Plug
#56460 & #56461
Qty Spare Part NO.
1 56153ASS17
2 P61046
2 P61047
4 P61040
4 P61043
2 P61042
8 P61045
8 P61044
S-S-004359