ENGLISH
Adjust the temperature setting by keeping in
mind that the temperature inside the appliance
depends on:
•
room temperature
•
how often the door is opened
•
the quantity of food stored
•
the location of the appliance
Important! If the ambient temperature is
high or the appliance is fully loaded, and the
appliance is set to the lowest temperatures, it
may run continuously causing frost to form on
the rear wall. In this case a higher temperature
must be set to allow automatic defrosting and
therefore reduced energy consumption.
Deactivate/activate freezing function
The freezing-humidity control is available on the
rear wall of the refrigerator compartment.
You can deactivate or activate freezing function
in the freezer compartment.
•
To deactivate the freezing function, adjust
the freezing-humidity control slider to the
right end.
•
To activate the freezing function, adjust the
freezing-humidity control slider to the left
end.
Freezing-humidity
control slider
When the freezing function is deactivated,
you can use the freezer compartment for
food refrigeration.
Humidity adjustment
You can use the freezing-humidity control
slider to adjust humidity inside the refrigerator
compartment.
Door open alarm
If the door of the appliance is left open for two
minutes, the buzzer will sound continuously
close the door or press the
Connect to an ice maker
•
The appliance is equipped with an ice maker
connector through which you can connect
an ice maker (not included).
•
To purchase an ice maker, contact the
Authorised Service Centre listed at the end
of this manual.
13
Freezing-humidity
control slider
1