Technical Data - ANSMANN POWERBANK 24.0 Manual De Instrucciones

Quick-Charge-capable or supports Power Delivery (PD). Please refer to
this information from the product information or operating instructions
of the respective manufacturer or the Internet.
Simultaneous charging of multiple end-devices is possible with restric-
tions. This depends on the total charge current required.
The POWERBANK switches off automatically after the charging is
complete. Please disconnect your device from the POWERBANK once the
charging process is complete. Please note that the Powerbank should
not be charged and discharged simultaneously.
The POWERBANK has a smart microcontroller that detects the connec-
ted device, provides the optimum current, and thus reduces the
charging time to a minimum.
The POWERBANK may heat up a little depending on the charge/dischar-
ge current.

TECHNICAL DATA

1. Cell type:
2. Capacity:
3. Input:
4. Output:
5. Accessories:
6. Operating temperature: -10°C to +25°C
7. Charge time:
8. Protective functions:
9. Display:
Deutsch |
Italiano | Nederlands | Dansk | Suomalainen | Norsk | Svenska
Li-Po rechargeable battery pack
24.000mAh / 88.8Wh
Micro-USB:
USB Type C (PD): 5VDC | 2
USB:
USB (QC3.0) / USB Type C (PD):
Total output:
When any three or two outputs are loaded at
the same time, the output will jump to 5VDC.
2x charging cables (USB to Micro-USB and
USB Type C to USB Type C)
5V | 2 A:
.0
9V | 2 A:
.0
Over-charging protection, deep discharge
protection, overload protection
short-circuit protection
LED display
English | Français | Español | Português
5VDC | 2 A
.0
A
.0
9VDC | 2 A
.0
5VDC | 3 A
.0
5VDC | 3 A
.0
9VDC | 2 A
.0
12VDC | 1.5A
18W | 3 A max.
.0
about 12h
about 7h