Descargar Imprimir esta página

Sanus VDLT16 Manual De Instrucciones página 15

Publicidad

4
POSITION TEMPLATE
15
To calculate your precise wall plate location, check out
TIP:
our Height Finder at sanus.com [www.san.us/1172].
Place the wall plate template
15
slotted holes over your stud center lines. Level and mark the hole locations.
Visit
HeightFinder™
www.
san.us/1172
at your desired height and position the
5
DRILL
4X
15
CAUTION:
Be sure you drill into the CENTER of the stud.
Drill the four pilot holes using a 1/2 in. (13 mm) diameter drill bit.
IMPORTANT:
Pilot holes must be drilled to a depth of 1 in. (25 mm).
Remove the wall plate template and discard.
1 in. (25 mm)
1/2 in.
(13 mm)
15

Publicidad

loading