Tabla de contenido
Manuales relacionados para Sanus VSL4
Resumen de contenidos para Sanus VSL4
- Página 1 VSL4 INSTRUCTION MANUAL We’ll Make It Stress-Free If you have any questions along the way, just give us a call. 1-800-359-5520. We’re ready to help! Scan for easy install video http://san.us/400...
- Página 2 Does your TV weigh more than 50 lb (22.7 kg) including accessories? 50 lb No — Perfect! (22.7 kg) Yes — This mount is NOT compatible. Visit MountFinder.Sanus.com or call 1-800-359-5520 (UK: 0800-056-2853) to fi nd a compatible mount. What is your wall made of? Drywall with Solid concrete or...
- Página 3 STEP 1 Attach Bracket to TV Parts and Hardware for STEP 1 WARNING: This product contains small items that could be a choking hazard if swallowed. Before starting assembly, verify all parts are included and undamaged. If any parts are missing or damaged, do not return the damaged item to your dealer;...
- Página 4 Parts and Hardware for STEP 1 WARNING: This product contains small items that could be a choking hazard if swallowed. Before starting assembly, verify all parts are included and undamaged. If any parts are missing or damaged, do not return the damaged item to your dealer;...
- Página 5 1-2 Spacers 1-1 Select TV Screws Hand thread screws into the threaded inserts on the back of your TV Your TV type will help you determine which hardware to determine which screw diameter (M4, M6, or M8) to use. confi guration to use. Match your type of TV to the suggested hardware confi...
- Página 6 1-3 Measure Your TV Hole Pattern 1-4 Attach Extensions (200 x 200 mm ONLY) Measure the width and height of your If mounting to a TV with a 200 x 200 mm (7 ⅞ x 7 ⅞ in.) hole pattern, add the extension plates TV hole pattern in mm.
- Página 7 1-5 Attach TV Bracket with 200 x 200 mm Extensions Position the TV bracket with extensions over your TV hole pattern and install using the screw, washer, and spacer (if needed) combination you selected for your TV. M4/M6/M8 screw and washer 08 10 11 M4 spacer, screw, and washers M6/M8 spacer, screw, and washer...
- Página 8 1-5 Attach TV Bracket 200 x 100 mm and 100 x 100 mm Position the TV bracket over your TV hole pattern and install using the screw, washer, and spacer (if needed) combination you selected for your TV. 7.87 M4/M6/M8 screw and washer 200.0 3.94 100.0...
- Página 9 1-5 Attach TV Bracket 75 x 75 mm Position the TV bracket over your TV hole pattern and install using the screw and spacer (if needed) combination you selected for your TV. 2.95 M4/M6/M8 screw 75.0 05 07 08 10 11 2.95 75.0 M4/M6/M8 screw and spacer...
- Página 10 1-6 Adjust Release Cord Adjust release cord until bottom of cord is level with the bottom of the TV.
- Página 11 Before starting assembly, verify all parts are included and undamaged. If any parts are missing or damaged, do not return the damaged item to your dealer; contact Customer Service. Never use damaged parts! Sanus Magnetic Stud Finder NOTE: Not all hardware included will be used.
- Página 12 NOTE: See Introducing Sanus Magnetic Stud Finder* located in your Welcome folder for more detailed operation of stud fi nder. Locate a nail/screw in the stud using the Sanus magnetic stud fi nder provided. Find the edges of the stud using the probe of the stud fi...
- Página 13 Level the wall plate template and tape in place. NOTE: For assistance in determining wall plate location, see HeightFinder at sanus.com. IMPORTANT : Be sure you mark and drill into the center of the stud.
- Página 14 Level the wall plate template and mark the hole locations. NOTE: For assistance in determining wall plate location, see Height Finder at sanus.com. Drill two pilot holes using a 10 mm (3/8 in.) diameter drill bit.
- Página 15 Remove the wall plate template and insert two anchors CAUTION: Be sure the anchors are seated fl ush with the concrete surface. Remove the wall plate template . Tighten lag bolts only until they are pulled fi rmly against the wall plate CAUTION: Improper use could reduce the holding power of the lag bolt.
- Página 16 STEP 3 Attach TV to Wall Plate HEAVY ! You may need assistance with this step. Fit the top hole on the TV bracket onto the top hook of the wall plate Swing the TV bracket down until the locking tab engages the lower hook of the wall plate You will hear a “click”...
- Página 17 Dimensions 7.87 200.0 3.94 0.35 100.0 2.95 75.0 2.13 [54.1] 7.87 200.0 6.00 2.95 3.94 0.62 4.39 152.4 75.0 100.0 15.7 6.00 111.6 [152.4] 4.42 8.87 [112.32] 225.4 UP TO 10" 9.98 253.5...
-
Página 18: Listo Para Comenzar
¿Su televisor pesa más de 22.7 kg (50 libras) incluyendo los accesorios? No — ¡Perfecto! 50 libras Sí — Este soporte NO es compatible. Visite MountFinder.Sanus.com o llame al 1-800-359-5520 (Reino Unido: 0800-056-2853) para (22.7 kg) encontrar un soporte compatible. -
Página 19: Paso 1 Fijar La Placa De Sujeción Al Televisor
ESPAÑOL PASO 1 Fijar la placa de sujeción al televisor Piezas y elementos de sujeción para el PASO 1 ADVERTENCIA: Este producto contiene piezas pequeñas que, si fuesen tragadas, podrían producir asfixia. Antes de iniciar el ensamblaje, compruebe que todas las piezas estén incluidas y en buenas condiciones. Si faltan piezas o alguna está dañada, no devuelva el artículo al distribuidor;... -
Página 20: Paso 2 Fijar La Placa Mural A La Pared
ESPAÑOL 1-5 Coloque la placa de sujeción Ubique la placa de sujeción sobre el patrón de orificios del televisor e instálela usando la selección de tornillo, arandela y espaciador (si fuera necesario) que seleccionó para su televisor. 1-6 Ajuste del cable de desenganche Ajuste el cable de desenganche de modo que la parte inferior del cable esté... -
Página 21: Opción Para Montantes De Madera
Nivele la plantilla de placa mural y fíjela con cinta adhesiva en el lugar. NOTA: Si necesita ayuda para determinar la ubicación de la placa mural, utilice la herramienta HeightFinder disponible en sanus.com. IMPORTANTE : Asegúrese de marcar y perforar el centro del montante. -
Página 22: Opción Para Hormigón Sólido O Bloques De Cemento
Nivele la plantilla de placa mural y marque la ubicación de los orificios. NOTA: Si necesita ayuda para determinar la ubicación de la placa mural, utilice la herramienta HeightFinder disponible en sanus.com. Con una mecha de 10 mm (3/8'') de diámetro, realice los orificios guía. -
Página 23: Paso 3 Fijar El Televisor A La Placa Mural
ESPAÑOL PASO 3 Fijar el televisor a la placa mural ¡ELEMENTO PESADO ! Es posible que necesite ayuda en este paso. Coloque el orifi cio superior del soporte de televisor sobre el gancho superior de la placa de pared. Incline el soporte de televisor hacia abajo hasta que la pestaña de bloqueo se enganche en el gancho inferior de la montura de pared. Se oirá... - Página 24 ©2013 Milestone AV Technologies, a Duchossois Group Company. All rights reserved. Sanus is a division of Milestone. All other brand names or marks are used for identifi cation purposes and are trademarks of their respective owners.