3. INSTALLING CHILD SEAT. GROUP 2 AND 3.
WARNING
1. Place the child seat on the seat of the vehicle, (3.1).
2. Place the child in the child car safety seat (3.2).
3. Fasten seat belt, making sure the lap belt passes under both
armrests and that the diagonal shoulder belt passes under the
armrest closest to the anchorage point. Check that the belt is not
twisted (3.3).
4. Insert the vehicle safety belt in the vehicle anchor point. You will
hear a "click" when properly installed (3.4).
Always check that the seat belt is firm and unwrinkled, but that it
does not cause the child discomfort. To release your child, unbuckle
the safety belt as described in the instructions.
4. CLEANING AND MAINTENANCE
Removal
1. Loosen the sheath, and remove from the elevator support (4.1).
Cleaning the seat
1. Wash the straps and plastic parts with neutral detergent and
warm water.
2. Ensure that no soap enters the buckle or metal parts.
3. Do not use chemicals or bleach on any part of the chair.
4. Dry thoroughly before use.
If you have any question about using or installing this product, or if you need a
spare part contact our Customer Service.
10
Use Group 2 and 3 only from approx.
4 to 12 years of age (15-36 kg).
WASHING INSTRUCTIONS:
· The cover is removable and washable at 30º.
Dry in the fresh air only.
· Wash in washing machine (cold).
· Do not use bleach.
· Dry clean, with any solvent except
trichloroethylene.
· Do not use dryer.
· Do not iron.
ORRUA
ORRUA