Cleaning And Maintenance - vivitta vin 906 Manual De Instrucciones

tiP: You can readjust the height of the vehicle
headrest.
iMPortant! The diagonal section of the belt
should cross over towards the back. The path of
the belt can be adjusted using the adjustable belt
deflector on the door frame.
iMPortant! The diagonal part of the belt should
never point towards the vehicle belt deflector. if this
is the case the safety seat should only be used in the
back seat.
To ensure the child's safety, the following items
should be checked before every trip:
• The safety seat is well anchored.
• The part of the belt that crosses the abdomen
passes through the abdominal guides (11)
sides of the seat cushion.
(27)
• The diagonal section of the belt on the side
of the vehicle belt buckle also passes through
(11)
the abdominal belt guide group on the seat
cushion.
• The diagonal section of the belt passes through
the red clip (2) on the headrest.
• The diagonal section of the belt passes diagonally
towards the back.
• The straps are taut and not twisted.
30
(2)
Diagonal
belt guide
fig. 21
(group 2/3).
(27)
(27) Diagonal belt
section.
(28)
Abdominal belt
section.
(29)
Vehicle's belt
buckle.
(11) Abdominal
29
belt guide
(group 0/1/2/3).
b
11
on both
29
2

9. cleaning and Maintenance

1. Straps and plastic parts should be cleaned using a
neutral detergent and warm water.
a
2. Make sure soap does not enter the buckle or other
metal parts.
27
3. Do not use chemical products or bleach on any
part of the seat.
28
Washing
instructions:
· dry clean, any
solvent except
· the cover can be
trichlorethylene.
removed and washed
· do not use a dryer.
at 30 °c. it should
only be air-dried. · do not iron.
· Machine wash, cold.
· do not use bleach.
if you have any doubts about using or installing this
product, or you need a replacement part, please get in
touch with our customer service team.
10. guarantee
1. the guarantee will not apply to defects or flaws
caused by improper use or non-compliance with the
regulations governing installation or maintenance
described in the user manual that accompanies the
product.
2. the guarantee covers the free repair of all factory
defects and flaws.
3. in the event the repair(s) carried out are not
satisfactory or the product is not in the optimal
conditions for fulfilling the use or uses for which it
30 °C
was designed, the title holder of the guarantee will
be entitled to substitution of the article purchased
by one of similar characteristics or a full refund of
the cost of the article within a period of 2 years.
4. the guarantee will be automatically revoked if the article
has been repaired, or efforts have been made to repair it,
by persons not authorised by the manufacturer.
31