Alternate Wiring - Honeywell RTHL2310 Serie Guía De Instalación Rápida

Advanced Installation Guide

Alternate Wiring

If labels do not match letters on the thermostat, check
the chart below and connect to terminal as shown here
(see notes, below).
B
If wires will be connected to both
terminals, remove metal jumper (see page 6).
Do not use
electrical tape.
If you have a heat pump without auxiliary/backup
heat connect O or B, not both. If you do not have
a heat pump, do not connect B. Wrap bare end of
wire with electrical tape.
Place a jumper (piece of wire) between Y and W if
you are using a heat pump without auxiliary/backup
heat.
Thermostat does not work on Heat Pumps with auxiliary/
backup heat.
69-2578ES—01
O G Y
C X
or . Wrap bare end of wire with
20
4 4
R
and
R Rc
M32734
Rc