Before Calling For Service; Disposal - Hoshizaki IM-130ANE-HC Manual De Instrucciones

Ocultar thumbs Ver también para IM-130ANE-HC:
Tabla de contenido

Publicidad

Idiomas disponibles
  • MX

Idiomas disponibles

  • MEXICANO, página 40
[d] Air Filter (Air-Cooled Model Only)
Plastic mesh air filters remove dirt or dust from the air, and keep the condenser from getting clogged. If the filters get clogged,
the icemaker's performance will be reduced. Remove and clean the air filter(s) at least twice per month:
1) Slide the air filter off the louver.
2) Clean the air filter by using a vacuum cleaner. When severely clogged, use warm water and
a neutral cleaner to wash the air filter.
3) Rinse and dry the air filter thoroughly.
After cleaning, be sure to place the air filter back in position.

2. BEFORE CALLING FOR SERVICE

[a] Error Code Indication
If the error code "E" is indicated on the display, before calling for service, check the following.
Code
E1
Freeze error. Unplug unit and plug it back in after 3 minutes. Clean air filter (air-cooled model). Lower ambient
temperature or ensure adequate clearance around unit (see "I. 2. LOCATION"). If error persists, call for service.
E2
Defrost error. Unplug unit and plug it back in after 3 minutes. If error persists, call for service.
EE
Other error. Unplug unit and plug it back in after 3 minutes. Clean air filter (air-cooled model). Check for water
failure or closed water supply tap. Lower ambient temperature or ensure adequate clearance around unit (see "I. 2.
LOCATION"). If error persists, call for service.
EF
Possible gas leak. Do not touch the unit. Ventilate the area and immediately call for service.
[b] No Error Code Indication
If the icemaker does not work properly or does not work at all and no error code is indicated on the display, before calling for
service, check that:
* The power is supplied to the unit.
* The water is turned on.
* The air filter is clean (air-cooled model).
* The cooling water circuit has a proper flow (water-cooled model).
For further assistance or advice, contact your local Hoshizaki service agent.
[c] Alarm Code Indication
If the alarm code A1 or A2 appears, the gas sensor may be defective. Contact your local Hoshizaki service agent.

3. DISPOSAL

Comply with local regulations regarding disposal of this appliance and its refrigerant gas. Before you scrap the appliance, take
off the door to prevent children trapped.
Correct disposal of this product:
This marking indicates that this product should not be disposed with other household wastes throughout the EU. To
prevent possible harm to the environment or human health from uncontrolled waste disposal, recycle it responsibly
to promote the sustainable reuse of material resources. To return your used device, use the return and collection
systems or contact the retailer where the product was purchased. They can take this product for environmental safe
recycling.
NOTICE
WARNING
Do not damage the refrigerant circuit.
Remedy
7
ENGLISH
Air Filter
Louver

Publicidad

Tabla de contenido
loading

Este manual también es adecuado para:

Im-240ane-hcIm-240awne-hc

Tabla de contenido