Hama Delta Ovum LED Instrucciones De Uso página 3

G Operating instruction
Thank you for choosing a Hama product.
Take your time and read the following instructions
and information completely. Please keep these
instructions in a safe place for future reference.
If you sell the device, please pass these operating
instructions on to the new owner.
If you sell the device, please pass these operating
instructions on to the new owner.
1. Explanation of Warning Symbols and Notes
Warning
This symbol is used to indicate safety instructions or
to draw your attention to specific hazards and risks.
Note
This symbol is used to indicate additional
information or important notes.
2. Package Contents
• 1 Delta Ovum LED universal charger
• 1 100 V-240 V adapter
• These operating instructions
3. Safety Notes
• The product is intended for private, non-
commercial use only.
• Use the product for its intended purpose only.
• Do not operate the product outside the power
limits given in the specifications.
• Protect the product from dirt, moisture and
overheating, and only use it in a dry environment.
• Do not use the product in the immediate vicinity of
heaters or other heat sources or in direct sunlight.
• Only connect the product to a socket that has
been approved for the device. The socket must be
installed close to the product and easily accessible.
• Disconnect the product from the network using the
power button – if this is not available, unplug the
power cord from the socket.
• Lay all cables so that they do not pose a tripping
hazard.
• Do not bend or crush the cable.
2
• Do not drop the product and do not expose it to
any major shocks.
• Keep the packaging material out of the reach of
children due to the risk of suffocation.
• Keep this product, as all electrical products, out of
the reach of children!
• Dispose of packaging material immediately
according to locally applicable regulations.
• Do not modify the product in any way. Doing so
voids the warranty.
• Do not use power supply units that are not
recommended by the manufacturer.
Electrical shock hazard
• Do not use the product if the power supply
unit or power cable are damaged.
• Do not attempt to service or repair the device
yourself. Leave any service work to qualified
professionals.
• Do not open the device or continue to
operate it if it becomes damaged.
Warning - Batteries
• Do not attempt to charge any Li-ion batteries
with voltages above or below the voltage
range specified for this charger. This can
damage the charger.
• Do not attempt to charge any non-
rechargeable batteries (e.g. alkaline) or any
batteries which are damaged, leaking or
corroded.
4. Getting Started and Operation
• Connect the charger to the power supply unit
(Pic. 1).
• When the red power LED remains lit, the charger
is in standby mode.