Operating Your Freezer; Temperature Control - Avanti FFVF140D0W Manual De Instrucciones

Plug in your freezer. Wait for 30 minutes, then open the freezer door to determine if the freezer is
working properly.
Press and hold Lock for three seconds, then press
the freezer. The set temperatures will cycle between cold, colder and coldest. The LED
indicator light for each temperature selection will be highlighted.
The new setting will be activated after 15 seconds of no activity on the control panel.
Ø Temperature Control
· Control Panel Lock
To prevent accidental activation, the control panel automatically locks after 30 seconds of inactivity. To
use the control panel, you must unlock it first.
Refrigerator / Freezer Modes
This freezer has an advanced design feature that lets you change it from a freezer to a refrigerator. You
can only use the control panel to switch modes.
The Freezer/Fridge light on the control panel indicates the current mode.
1 Press and hold
2 Press and hold the
beeps and the indicator above FRZ / REF will turn off.
3 Once in the REFRIGERATOR mode, you can select the desired temperature as
described previously in this manual.

OPERATING YOUR FREEZER

for three seconds to unlock the control panel.
button again for three seconds to change modes. The panel
10
to set the temperature inside