Avanti STW16D0W Manual De Instrucciones página 19

Note:

Clothes easily discolored should be washed separately so as to prevent inter-dyeing.

If you want to change a selected program, press the POWER button first to turn the unit off, then
press the POWER button again to turn the unit back on, then press the Program button to select
the new cycle before pushing START/PAUSE button.

When the Rinse and Spin functions are ON, do not use detergent.

If you want to drain the water during washing, press the POWER button first to turn the unit off,
then press the POWER button again to turn the unit back on, then select the SPIN function. Press
START/PAUSE button again to restart.
DELAY START (PRESET) SETTING
Select this option when you would like to load the washer but not run the wash cycle until a later time.
Note:
As washing machines and other appliances are considered to present a potential child entrapment
danger; you should never run a wash cycle when you are not present for either the entire or major
portion of the cycle.

Press down the power button.

Load the washing machine and select the appropriate wash program.

Press DELAY button continuously to select the delay start time. (From 1 hour to 48 hours)

Close the lid completely.

Press START/PAUSE button to start the course.
CONTROL PANEL - CHILD SAFETY LOCK
If you have small children, it is recommended that you activate this setting every time you use the
washing machine as children can be attracted to and enticed to play with the washing machine.

Select the desired washing program as described previously in this manual

Select the appropriate program and press START/PAUSE button to start the washing machine.

Press and hold both the TEMP and PROGRAM buttons until you hear a "BEEP" sound
(approximately 3 seconds) and the CONTROL LOCK indicator is illuminated.

The "CL" indicator and remaining wash time will display.

While the control lock is activated the only buttons that will function will be the Power ON/OFF and
the buttons to de-activate the control lock function.

To de-activate the child lock function simply press and hold the TEMP and PROGRAM buttons
again.
ADDING / REMOVING CLOTHING AFTER THE CYCLE HAS STARTED
Your washing machine is equipped with a safety system that will stop the machine when the
lid is opened during a wash cycle or will prevent a wash cycle to start.
THE MACHINE WILL NOT OPERATE WITH THE TOP LID OPEN, CLOSE THE LID AND PRESS
THE START / PAUSE BUTTON.
To add or remove clothing to/from a wash cycle follow the steps below:

Open the lid, the machine will stop (all indicators on the control panel will turn off).

Add or remove the clothing as needed.

Close the lid.

Press the Power START / PAUSE button to continue the previous wash cycle.
19