Technical Data; Noise Emission Specifications; Vibration Specifications; Scope Of Supply - Mafell KSS 60 cc Manual De Instrucciones

2.3 Technical data

Universal motor, radio and TV
interference suppressed
Power input (nominal load)
Current at nominal load
Saw blade speed while idling
Saw blade speed at normal load
Cutting depth 0° /30° /45°
Tilting saw unit
Saw blade diameter max/min
Largest thickness basic saw blade body
Tool cutting width
Saw blade mounting hole
Hose connector diameter
Weight without mains cable, without parallel guide fence
Dimensions (W x L x H)

2.4 Noise emission specifications

Noise emission values determined according to EN 60745-1 and EN 60745-2-5:
Idling
Machining
The noise measurement was recorded using the saw blade included in the standard equipment.
The values stated do not take into consideration any possible series variances and are not suitable for
determining the rating levels, as these fluctuate in dependence on the time in service, the respective type of
machining and the environmental influences. The noise rating level can therefore only be determined on an
individual basis at the machine user's position.

2.5 Vibration specifications

The typical hand-arm vibration is less than 2.5 m/s

2.6 Scope of supply

Cross-cutting system KSS 60 cc complete with:
1 carbide-tipped circular saw blade Ø 185 mm (6 1/4 in.), 32 teeth
1 riving knife / splitter (thickness 1.5 mm/1/16 in.)
1 service tool in bracket on the machine
1 operating manual
1 folder "Safety Instructions"
1 carrying case only for item No. 919002, 919030, 919031, 919032, 919035
1 parallel guide fence
Sound power level
103 dB (A)
104 dB (A)
2 .
230 V~, 50 Hz or 110 V~, 50 Hz
1800 W (230 V) or 1400 W (110 V)
8.4 A (230 V) or 9.1 A (110 V)
2700 min
2600 min
66 / 62 / 53 mm
0° – 45°
185 /172 mm
1.4 mm (6 1/4 in./5 3/4 in.)
2.4 mm (6 1/4 in./5 3/4 in.)
20 mm
35 mm (1 3/8 in.)
6.1 kg (6.2 lbs)
257x750x268 mm
Workplace-related emission value
93 dB (A)
91 dB (A)
-18-
- 4700 min
-1 -1
- 4600 min
-1 -1