Adjusting The Height Of The Upper Rack; Removing The Upper Rack - Samsung DMT300 Serie Manual Del Usuario

aDjuStIng thE hEIght of thE uppEr rack

This Samsung dishwasher uses a rack able to accommodate larger sized plates. By adjusting the height of
the upper rack, you can make room for different size dishes. You can place dinner plates with a diameter of
14 in. (36 cm) into the lower rack and plates up to 12 in. (30 cm) in diameter into the upper rack.
dmT300 Series dmT210 Series
To adjust the height of the upper rack, follow these steps:
1. Remove the upper rack following the directions in Removing the
Upper Rack below.
2. If you want to lower the upper rack, re-install the rack as shown in
Figure A to the right.
3. If you want to raise the upper rack, re-install the rack as shown in
Figure B to the right.
We recommend adjusting the height of the upper rack before loading
dishes into the rack, as the dishes may be damaged.
CAUTION

rEmovIng thE uppEr rack

To remove the upper rack:
Pull the upper rack towards the front and then remove it by lifting it up slightly and pulling it towards the
front as shown in figures below.
While the upper rack is removable, it must be installed for the dishwasher to operate properly.
If you attempt to operate the dishwasher without the rack, the dishwasher will be noisy and perform
CAUTION
poorly.
DMT300-00062A .indb 15
/
using your dishwasher _15
2010-08-09 11:17:43