Adjusting The Height Of The Upper Rack; Removing The Upper Rack - Samsung DW80M9 Serie Manual Del Usuario

Ocultar thumbs Ver también para DW80M9 Serie:
Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

using your dishwasher

ADJUSTING THE HEIGHT OF THE UPPER RACK

You can adjust the height of the upper rack in your Samsung dishwasher so that the lower rack can
accommodate larger sized dishes. Depending on where you set the upper rack height, the lower rack can
accommodate plates up to 12 in. (30 cm) in diameter and the upper rack can accommodated plates up to
8 in. (20 cm) in diameter.
1. To lower the upper rack by 2 in. (5 cm), pull the
adjust handles located at the left and right sides
of the upper rack, and then push the upper rack
downwards slightly at the same time.
2. To raise the upper rack, just pull the upper rack
upwards. The adjuster handle will latch and the
upper rack will move to the high position.
We recommend adjusting the height of the upper
rack before loading dishes into the rack. If you
CAUTION
adjust the the rack after loading the dishes, you
may damage the dishes. If you do not adjust with
left and right handle together, the dishwasher
door may not close properly.
Pull out the upper rack from the tub until it is fully
revealed before adjusting the upper rack.

REMOVING THE UPPER RACK

Pull the upper rack towards the front and then remove it by lifting it up slightly and pulling it towards the
front. See the illustrations below.
While the upper rack is removable, it must be installed for the dishwasher to operate properly.
If you attempt to operate the dishwasher without the rack, noise will occur and the dishwasher will
CAUTION
perform poorly.
Step 1.
DW9900M_DD68-00184A-02_EN.indd 20
DW9900M_DD68-00184A-02_EN.indd 20
Step 2.
English - 20
Step 3.
2017-09-20
2017-09-20
3:26:51
3:26:51

Publicidad

Capítulos

Tabla de contenido
loading

Tabla de contenido