Crest Audio Pro-LITE 2.0 Manual Del Propietário página 24

Pro-LITE DSP 2.0 / 3.0
™
Power Amplifiers
The DSP in the Pro-LITE amplifier series performs the common signal processing functions required for most loudspeaker
®
applications. The processor functions include: equalization, band-pass filtering, crossover configuration, delay and limiting.
Please read this guide carefully to ensure your personal safety as well as the safety of your amplifier.
Pro-LITE DSP Features:
™
• ACL protection
™
• Revolutionary Pro-LITE class D topology
• Detented input controls
• Combination XLR 1/4" inputs
• Combination 1/4" or 1/4" 4 pole twist lock output connector
• Light weight
• Individual signal pass-thru 1/4" jacks on each channel
• LED illuminated
• DSP-based Loudspeaker Management System
WARNING: PLEASE REVIEW YOUR DSP SETTINGS BEFORE SENDING SIGNAL TO THE AMPLIFIER. INCORRECT
SETTINGS CAN POTENTIALLY DAMAGE SPEAKER ENCLOSURES. We have made every attempt to ensure the Setup
Wizard will help correctly configure the DSP; however, incorrect settings at any point of the setup process can
damage your speaker enclosures. If you have any questions, please no not hesitate to call our customer service line.
VENTILATION: For proper ventilation, allow 12" clearance from nearest combustible surface.
Make sure that vents are not blocked and air can flow freely through the unit.
WARNING: Changes or modifications to this unit not expressly approved by the party responsible for compliance
could void the user's authority to operate the equipment.
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to
Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in
a residential installation. This equipment generates, uses and can radiate radio frequency energy, and if not installed
and used in accordance with the instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular installation. If this equipment does
cause harmful interference to radio or television reception, which can be determined by turning the equipment off and
on, the user is encouraged to try to correct the interference by one or more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or and experienced radio/TV technician for help.
ENGLISH
• 120 ms of delay per channel
• 4 bands of parametric equalization per channel
• Security lock
• Adjustable fourth-order Linkwitz-Riley Crossover
• Adjustable fourth-order high-pass filter each channel
• Setup wizard
• MAXX Bass
®
• Horn EQ each channel
• Blue, backlit LCD screen
24