Troubleshooting - DeLonghi DCH5915ER Manual Del Usuario

TROUBLESHOOTING

PROBLEM
PF display
If the appliance shuts off unexpectedly Check that the appliance is receiving
A dot is flashing and unit is off
The display shows "Ht" blinking
CAUSE
Temperature sensor is not working
properly
power.
Delayed shut-off is activated
Room temperature reaches the set
temperature
The tip-over switch has been activated Make sure the appliance is standing
The internal temperature is too high.
The air intake or outlet grille is
obstructed
8
SOLUTION
The product needs to be serviced,
contact our toll free number for
assistance
Plug in
Wait till time elapsed or press the
button (E) twice to cancel the function
and push the button (A)
Use the "+" button to increase the set
temperature
upright on a flat surface, if the problem
persists contact our toll free number to
assist you
Check the appliance is correctly
positioned respecting the minum
distances from the wall, or objects, as
indicated on the instruction manual,
if not, position the appliance correctly
Remove the obstruction
Disconnect the plug from the outlet
and let the appliance cool down. After
few minutes plug the appliance again.
If the appliance doesn't work please
contact the De longhi toll free number