Important Safety Information - LABTEC Pulse 375 Guia De Inicio Rapido

Pulse375 manual AMR.qxd 7/23/03

IMPORTANT SAFETY INFORMATION

ELECTRIC SHOCK HAZARD
• Read these instructions.
• Keep these instructions.
• Heed all warnings.
• Follow all instructions.
• Unplug the speakers from the computer and from the
electrical outlet before cleaning them with a dry cloth.
• Install in accordance with the manufacturer's instructions.
• Place the speakers in a stable location so they will not fall
causing damage to the speakers or bodily harm.
• Do not use the speakers near water, and do not immerse
them in any liquid or pour any liquid on them.
• Do not block the openings in the speaker cabinets, never
push objects into speaker vents or slots because of fire or
electric shock hazards, and provide sufficient space
around the speakers for proper ventilation.
• Do not install near any heat sources such as radiators,
heat registers, stoves, or other apparatus (including
amplifiers) that produce heat.
• Do not defeat the safety purpose of the polarized plug. A
polarized plug has two blades with one wider than the
other. The wide blade is provided for your safety. If the
provided plug does not fit into your outlet, consult an
electrician for replacement of the obsolete outlet.
• Operate the speakers only from the low level audio line
out jack of the computer or of an audio device.
• Protect the power cord from being walked on or pinched
particularly at plugs, convenience receptacles, and the
point where they exit from the apparatus.
• Only use attachments/accessories specified by the
manufacturer.
English
12:53 PM Page 2
CAUTION
• For added protection during lightning storms, unplug the
speakers from the electrical outlet and turn off the
computer.
• Unplug this apparatus when unused for long periods of
time.
• Servicing is required when the apparatus has been
damaged in any way, such as when the power-supply
cord or plug has been damaged, liquid has been spilled or
objects have fallen into the apparatus, the apparatus has
been exposed to rain or moisture, does not operate
normally, or has been dropped.
• Refer all servicing to qualified service personnel.
• The speakers should be disconnected from the mains by
placing the power/standby switch in the off position and
unplugging the power cord of the speakers from the AC
mains receptacle.
• The socket-outlet shall be installed near the equipment
and shall be readily accessible.
WARNING:
TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT
EXPOSE THIS APPARATUS TO RAIN OR MOISTURE.
The Pulse ™ 375, Model: S-0103A/B speaker system provides convenient controls and a space-saving
design. Simply connect and enjoy!
Connecting your speakers to your PC
You can connect your speakers to your computer soundcard, or to an external audio source, such as a CD
player, cassette tape deck, or radio.
For optimum sound quality, place the subwoofer on the floor beneath your desk being careful not to block the
bass port. Be sure to maintain 6 inches of spacing around the subwoofer to allow for adeuqate ventilation.
These speakers can also be con-
nected to your video game con-
sole using a video game console
adapter available at many con-
sumer electronics stores.
Move switch to "Stand By" on
control pod.
1
1. Black plug to SPK OUT.
2. Green plug to AUDIO OUT on
PC, or other audio source.
3. Plug power cord into outlet.
4. Move switch on control pod to
"I" (on) position.
5. Adjust Volume.
3
LINE IN
SPK OUT
4
5
2
English