Assembly Instructions For Optional Height Rod (499Klrod) - Health O Meter 499KL Instrucciones De Uso

ASSEMBLY INSTRUCTIONS FOR OPTIONAL HEIGHT
ROD (499KLROD)
Note: These instructions are for mounting the optional height rod (499KLROD) to the
499KL scale. Height rod is not included in the scale and must be purchased separately
Mounting 499KLROD (Refer to Figure 11)
1. Remove the 2 plastic screw covers on the
pillar of the scale.
2. Insert the enclosed screws into the holes on
the pillar.
3. Position the large keyhole slots on the height
rod over each screw head. When positioned
correctly over both screws, gently slide the
499KLROD all the way down, in order to
secure the keyhole locks.
4. Tighten the screws with the enclosed wrench
(wrench is provided with the 499KLROD).
An open-ended wrench can be used to
tighten screws as well.
19
.
Figure 11