Brake Handle Assembly - Medline MDS86845W Guia Del Usuario

Brake Handle Assembly

1. Press and hold the yellow button in (item C in Figure 1 above and Figure 9 below).
2. Insert hand grip into appropriate hole (see Figure 10).
Note: Keep brake cable to the outside of the walker.
3. Repeat steps 1-2 for other hand grip.
Figure 9
Chart 2
Handle Height adjustments (set to Dimension B above):
Hole 1
Hole 1 39" (99.1 cm)
Hole 2 38.25" (97.2 cm)
Hole 3 37.5" (95.3 cm)
Hole 4 36.75" (93.3 cm)
Hole 5 36" (91.4 cm)
Hole 6 35.25" (89.5 cm)
Note: 1 is the highest, 5 is the shortest setting.
Adjust the backrest height for comfort:
1. Pull the Backrest Height Adjust Lock (item G in Figure 1 above).
Raise or lower the backrest to desired height.
2. Release the Backrest Height Adjustment Knob. Move backrest
to desired height. Place knob firmly into appropriate hole.
Ensure backrest is firmly locked in place.
3. Repeat steps 1-2 for the other side.
8
Figure 10
Hole 2
38" (96.5 cm) 37" (94 cm)
37.25" (94.6 cm) 36.25" (92.1 cm)
36.5" (92.7 cm) 35.5" (90.2 cm)
35.75" (90.8 cm) 34.75" (88.3 cm)
35" (88.9 cm) 34" (86.4 cm)
34.25" (87 cm) 33.25" (84.5 cm)
Legs
Hole 3 Hole 4
36" (91.4 cm)
35.25" (89.5 cm)
34.5" (87.6 cm)
33.75" (85.7 cm)
33" (83.8 cm)
32.25" (81.9 cm)
Hole 5
35" (88.9 cm)
34.25" (87 cm)
33.5" (85.1 cm)
32.75" (83.2 cm)
32" (81.3 cm)
31.25" (79.4 cm)
MDS86845 Series (PIC-00311)
Revised: 12/28/2018