Control Panel - Danby DAC050MB2WDB Manual Del Propietário

INSTALLATION INSTRUCTIONS

CONTROL PANEL

1. Thermostat dial: Used to choose the level of
cooling.
• The lower numbers indicate warmer settings.
• The higher numbers indicate colder settings.
2. Program selector dial: Used to select which
program the appliance will run.
3. Low fan: This setting will circulate air at low
speed without engaging the cooling function.
4. Off/Arrêt: This setting will turn the appliance
off.
5. High fan: This setting will circulate air at a high
speed without engaging the cooling function.
6. High cool: This setting will provide cooling with
high fan speed.
7. Low cool: This setting will provide cooling with
low fan speed.
Note: Wait three minutes when switching programs
to allow the appliance to adjust.
CAUTION
The compressor is located on the left side
of the appliance, on the same side as the
controls. This side of the appliance will be
heavier and more awkward to manipulate.
Inadequate support on the control side of the
appliance can result in personal injury and
damage to the appliance and your property. It
is recommended that you have someone assist
you during the installation of this appliance.
7
6
7
6
9
1
2
3
1
4
5
3
4
2
OFF
ARRÉT
5