Sa F E T Y; Electric Shock Hazard; Safety Installations - BDS Maschinen MAB 455 Instrucciones De Manejo

Sa f e t y i n s t a l l a t i o n s
R e s t a r t i n g p r o t e c t i o n
M a g n e t i n d i c a t o r
Sy m b o l s o n t h e m a c h i n e
M A B 4 5 5
NOTE
► The machine stops automatically of the magnetic clamp is
switched off or in the event of a power failure .
In order to prevent unexpected starting of the machine when the
magnetic clamp is switched on again or when the power supply
returns after a power failure ("restarting protection"), the machine
must be switched on at the ON/OFF switch again .
The magnet indicator provides a visual control of the magnet's
clamping force .
■ Magnet indicator is lit GR EEN:
The magnet's clamping force satisfies the minimum
requirements . Machining can be carried out .
■ Magnet indicator is lit R ED :
Insufficient magnet clamping force. Machining must not be
carried out with the machine . This can be the case in the event
of insufficient material thickness, uneven surface or due to
paint, scale or zinc coatings .
The symbols on the machine have the following meaning:
Sy m b o l M e a n i n g

Electric shock hazard!

Read the operating instructions before beginning
work!
Wear protective goggles and ear protection!

Sa f e t y

1 1