6.
Unscrew the washer and bolt that hold the pin in the hole on the right of the lower hinge,
then remove the pin.
7.
Insert the pin into the hole to the left of the lower hinge and secure the pin with the bolt
and washer.
8.
Mount the lower hinge on the left side of the refrigerator.
9.
Unscrew the screw that holds the door stop on the lower right side of the freezer door,
then remove the door stop and install it on the lower left side.
Refrigerator door
Door stop
10. Install the freezer door.
11. Move the door axis from the top right of the freezer door to the top left of the freezer door.
And move the left hole cover to the right.
Door axis
12. Remove the hole cover from the hole for the central hinge screw on the left side of the
refrigerator and install it in the screw slots on the right side of the refrigerator.
V.4.0
Bearing axis
Bearing axis
Hole cover
Screw hole cover
30
13. Install the central hinge on the left side using the two screws previously removed.
Freezer compartment door
Central hinge
Door axis
14. Take the left stop in the bag with the accessories and install it on the lower left side of the
refrigerator door.
Refrigerator door
15. Install the refrigerator compartment door.
16. Move the door axis from the top right of the refrigerator door to the top left of the
refrigerator compartment door. And move the left hole cover to the right.
17. Unscrew the screw that holds the hole cover from the location for the central hinge screw
in the upper left part of the refrigerator, remove the cover and the screw that holds the
cover on the upper right part of the refrigerator.
Screws
Hinge screw hole cover
18. Attach the top hinge to the top left of the refrigerator using the three screws you
unscrewed before. Before tightening the hinge screws, make sure that the top of the door
is properly aligned with the refrigerator and that the elastic seal is tight.
19. Install the hinge cover on the hinge on the upper left side of the refrigerator.
Hinge cover
Screws
Upper hinge
Screws
Left door stop
31
V.4.0