Starting Up - EWT CS 5 COMFORT Manual De Instrucciones

Image A: Positions
Position " ": Start
Position " ": Prise Confort: Power is controlled by the power tool.
Position " ": Stop
Image B : Integrated socket
Power tools such as: drills, saws or sanders up to max, 2200W can be plugged directly into the integrat-
ed electrical socket (21) on the vacuum cleaner.
Connect the hosepipe (Ø35mm) to the dust extraction outlet on the power tool using the adaptor
supplied for the tool. (You will find other suitable adaptors in specialist and DIY stores).
Plug the power tool into the "Integrated Socket" on the vacuum cleaner. Plug the vacuum cleaner into
the mains.
WARNING:
Only plug the vacuum cleaner into an earthed socket with a 16 Amp capacity.
Start the power tool and run it briefly at high speed. After a short lapse of time, the vacuum cleaner starts
up and vacuums the dust and shavings produced.
DELAYED SHUT DOWN
After the power tool is switched off, the vacuum cleaner continues to work for a certain time in order to
vacuum the dust and shavings remaining in the power tool and the hosepipe.

STARTING UP

36