Approved Kombiengines; Assembling The Unit - Stihl FH-KM Manual De Instrucciones

Working Technique
Working position and method are the
same as for a brushcutter: Sweep the
cutter bar to and fro in an arc just above
the ground.
FH-KM

Approved KombiEngines

Only use KombiEngines supplied by
STIHL or expressly approved by STIHL
for use with the KombiTool.
This KombiTool may be operated only in
combination with the following
KombiEngines:
STIHL KM 55 R, KM 56 R, KM 85 R,
KM 90 R, KM 110 R, KM 130 R
WARNING
Loop-handled machines must be
equipped with a barrier bar.
This KombiTool may also be mounted to
STIHL brushcutters (basic power tools)
with a split drive tube (T models).
Operation of this KombiTool is therefore
also permitted on the following power
tool models:
STIHL FS 55 RT, FS 83 RT, FS 85 RT
WARNING
Please refer to the power tool's
instruction manual regarding to use of
the barrier bar.

Assembling the Unit

Pull the protective caps off the ends
N
of the drive tube and keep them in a
safe place for later use – see
"Storing the Machine".
NOTICE
The plug may come out of the drive tube
when you pull off the cap. Push it back
into the drive tube as far as stop.
English
9