Publicidad
Idiomas disponibles
Idiomas disponibles
2.- INSTALLATION
Open the box to take out the heater and fix the fixing plate of the base to the wall with screw (the distance of
the heater from the ground should be over 1.8 m).
After the installation, make sure if the heater is fixed firmly to the wall, and then plug in the power socket.
3.- OPERATION
To operate the heater, gently pull the cord once. The indicator on the heater will show "1". Pull the cord again
to operate at full power. The indicator will show "2". Pull the cord again to switch off the heater, "0" will be
indicated.
Power selection: 0－OFF 1－600W 2－1200W
Press or lift the reflection unit lightly to adjust the radiation angles and expand the radiation scope.
4.- MAINTENANCE
Clean and dust with a dry, soft cloth only when the unit is disconnected and cold.
Do not use solvents or abrasive products for cleaning.
This thermal radiator has been manufactured under an assured quality system using environment friendly
processes.
Please take the heaters to a clean point once their useful life is finished, in order to recycle their materials in
the right way.
5.- SPECIFICATIONS
Model:
IC-1200
Voltage:
230V~
Input:
1200W
Class I
IP24
4
Publicidad
