Joie i-Spin 360 E Manual De Instrucciones página 7

!
There are 11 adjustable positions
for ISOFIX. Whilst depressing the
ISOFIX button -1, pull out the
5
ISOFIX connector. -2
5
!
Make sure that both ISOFIX
connectors are securely attached
to their ISOFIX anchor points. The
colors of the indicators on both
ISOFIX connectors should be
completely green. -1
6
!
After successfully installing the
ISOFIX connectors, press the
ISOFIX adjustment buttons again
while pushing the seat back until it
comes in contact with the vehicle
seat back.
6
!
After attaching the ISOFIX, pull the
load leg downward to floor. When
the load leg indicator shows green,
the load leg is installed correctly.
!
Squeeze the load leg releasing
button, then adjust the load leg
length. 7
11
5
1
2
6
1
7
!
The load leg has 19 positions.
When the load leg indicator shows
red this means the load leg is in the
wrong position. 8
!
Make sure the load leg is in full
contact with the vehicle floor pan.
Red means it is installed
incorrectly.
8
!
Check to make sure the base is
securely installed by pulling on
both ISOFIX connectors.
!
The ISOFIX connectors must be
attached and locked onto the
ISOFIX anchor points. -1
9
!
The load leg must be installed
correctly with green indicator.
8
9
-2
9
1
2
12