Chauvin Arnoux F203 Guía De Inicio página 13

k
The O.L (Over Load) symbol is displayed when the display capacity is exceeded.
1.4 THE TERMINALS
The terminals are used as follows :
1
2.1. COMMISSIONING
Insert the battery supplied with the device as follows:
1. Using a screwdriver, unscrew the screw of
the battery compartment cover (item 1) on the
back of the housing and open it;
2. Place the battery in the compartment
(item 2), taking care to get the polarities right;
3. Close the battery compartment cover and
screw it to the housing.
Kilo- prefix
Compensation of the resistance of the leads
Continuity test
Diode test
Permanent display (automatic switching off de-
activated)
Spent battery indicator
2
2. USE
Item
1 Cold terminal (COM)
Hot terminal (+)
2
2
1
13
Function