Intermatic DT620CL Serie Instrucciones Para El Usuario Y La Instalación página 2

4 – Set the Time, Date and Location (Continued)
Turn the selector knob until the current date is displayed and
8.
press the OK button. The timer will automatically determine and
display the day of the week.
NOTE: "00" indicates 2000.
Adjusting Daylight Saving Time
9. DAYSAV and AUTO will show in the mode
display area (Fig. 4). The timer will
automatically adjust the clock for
Daylight Saving Time (DST) when set to
AUTO here. If you do not want the timer
to do this, turn the selector knob until
MANual shows.
10. After choosing AUTO or MANual, press the
OK button. The timer's starting date for
DST will show in the display in the form
of MONTH and week (Fig. 5).
The start and end dates for DST can
11.
change. The next four steps allow you to
change them for your location. If the timer's settings for DST are
already correct, press the OK button right away, otherwise:
a. First, turn the selector knob to choose the correct month
(01 through 12) for your DST starting date and press the OK
button.
b. Turn the selector knob again to change the week (01 = first,
02 = second, 03 = third, 04 = fourth, 0L = Last) for your DST
starting date and press the OK button.
c. Then, turn the selector knob to choose the correct month for
your DST ending date and press the OK button.
d. Turn the selector knob again to change the week for your DST
ending date and press the OK button.
Setting Location
12. The timer will now display LOC, the
default state and country (Alabama,
United States) (Fig. 6). The location
must be set in order for the Astronomic
feature to function.
a. First, turn the selector knob to choose
your state and press the OK button.
b. Turn the selector knob again to change from the country to the
section, if necessary. Your state may have from one to nine
sections to choose from (NE, NW, CTR, etc.).
c. Press the OK button to accept the location.
13. The timer will now display LOC, "TZ"
and the selected time zone for your
location (Fig. 7). If the timer's selection
is correct, press the OK button right
away, otherwise turn the selector
knob until the correct time zone shows
in the display and then press the OK
button.
Adjusting Dawn and Dusk
14. The timer will now display DAWN and
the calculated sunrise time for your
location (Fig. 8).
Accept the calculated sunrise time or
turn the selector knob until the correct
time shows in the display, and then
press the OK button.
2
ON ON OFF LOC DUSK DAWN OFF LOC DUSK DAWN
DAYSAV DAYSAV MAN MAN AUTO AUTO RAND CLOCK RAND CLOCK
MONTH MONTH DATE DATE YEAR YEAR
SKIP SKIP
EVENT EVENT
MO TU WE TH FR SA SU MO TU WE TH FR SA SU AM PM AM PM
OK OK MODE MODE PROG PROG ON/OFF ON/OFF
Fig. Fig.
4 4
ON ON OFF LOC DUSK DAWN OFF LOC DUSK DAWN
DAYSAV DAYSAV MAN MAN AUTO AUTO RAND CLOCK RAND CLOCK
MONTH MONTH
DATE DATE YEAR YEAR
SKIP SKIP
EVENT EVENT
MO TU WE TH FR SA SU MO TU WE TH FR SA SU AM PM AM PM
OK OK MODE MODE PROG PROG ON/OFF ON/OFF
Fig. Fig.
5 5
ON ON OFF OFF LOC LOC DUSK DAWN DUSK DAWN
DAYSAV MAN AUTO RAND CLOCK DAYSAV MAN AUTO RAND CLOCK
MONTH MONTH DATE DATE YEAR YEAR
SKIP SKIP
EVENT EVENT
MO TU WE TH FR SA SU MO TU WE TH FR SA SU AM PM AM PM
OK OK MODE MODE PROG PROG ON/OFF ON/OFF
Fig. Fig.
6 6
ON ON OFF OFF LOC LOC DUSK DAWN DUSK DAWN
DAYSAV MAN AUTO RAND CLOCK DAYSAV MAN AUTO RAND CLOCK
MONTH MONTH DATE DATE YEAR YEAR
SKIP SKIP
EVENT EVENT
MO TU WE TH FR SA SU MO TU WE TH FR SA SU AM PM AM PM
OK OK MODE MODE PROG PROG ON/OFF ON/OFF
Fig. Fig.
7 7
ON ON OFF LOC DUSK OFF LOC DUSK DAWN DAWN
DAYSAV MAN AUTO RAND CLOCK DAYSAV MAN AUTO RAND CLOCK
MONTH MONTH
DATE DATE YEAR YEAR
SKIP SKIP
EVENT EVENT
MO TU WE TH FR SA SU MO TU WE TH FR SA SU AM AM PM PM
OK OK MODE MODE PROG PROG ON/OFF ON/OFF
Fig. Fig.
8 8
15. The timer will now display DUSK and the
calculated sunset time for your location
(Fig. 9).
Accept the calculated sunset time or
turn the selector knob until the correct
time shows in the display, and then
press the OK button.
16. The timer will now jump to MANual mode.
5 – Set Initial Pair of ON and OFF Events
You may program the digital timer for up to 28 events. A time setting
to turn on (at a specific time, DAWN or DUSK) is considered an ON
event. A time setting to turn off (at a specific time, DAWN or DUSK) is
considered an OFF event.
NOTE: You must view an event screen before programming.
Viewing an Event
1. Ensure that the timer is in a normal operating mode by pressing
the MODE button, if necessary, until MANual, AUTO or RANDom
appears in the mode display area.
2. Press the PROG button to view the
first event screen (Fig. 10). If all
programming has been cleared, the
timer will display SKIP above the event
display ("01"), indicating that the first
event is not programmed, and
"--:--" will replace the time display.
NOTE: From any event viewing screen (with no displays flashing),
you may:
- Press OK to return to the normal operating mode without
making any change.
- Turn the selector knob to view the next event screen.
- Press PROG to set or change the event you are viewing. Event
number will flash.
Programming an ON Event
3. Press PROG again. The SKIP display
(or ON or OFF, if the timer has been
programmed) will begin flashing
(Fig. 11).
4. Turn the selector knob until the screen
displays the event setting you desire:
- ON only — for turning on at a preset time
- ON and DUSK — for turning on at sunset
- ON and DAWN — for turning on at sunrise
NOTE: The settings with SKIP or OFF are used for disabling an
event or programming an OFF event.
5. Press PROG to accept the event setting.
The Days Of Week (DOW) display will
begin to flash (Fig. 12).
6. Turn the selector knob until the screen
displays the DOW setting you desire:
- MO TU WE TH FR SA SU — for an event
that occurs every day
- MO TU WE TH FR — for a weekday event
- SA SU — for a weekend event
- MO (or TU, or WE, etc.) — for a single day event
7. Press PROG to accept the DOW setting. If you have chosen DAWN
or DUSK, skip to step 10. If you have chosen a preset time, the first
two digits of the Time Of Day (TOD) will begin to flash.
8. Turn the selector knob until the desired hour is reached and press
PROG. The last two digits of the Time Of Day (TOD) will begin to
flash.
ON OFF LOC DUSK DAWN
DAYSAV MAN AUTO RAND CLOCK
MONTH DATE YEAR
SKIP
EVENT
MO TU WE TH FR SA SU AM PM
OK MODE PROG ON/OFF
Fig.
9
ON ON OFF LOC DUSK DAWN OFF LOC DUSK DAWN
DAYSAV MAN AUTO RAND CLOCK DAYSAV MAN AUTO RAND CLOCK
MONTH MONTH DATE DATE YEAR YEAR
SKIP SKIP
EVENT EVENT
MO TU WE TH FR SA SU MO TU WE TH FR SA SU AM AM PM PM
OK OK MODE MODE PROG PROG ON/OFF ON/OFF
Fig. Fig.
10 10
ON ON OFF LOC DUSK DAWN OFF LOC DUSK DAWN
DAYSAV MAN AUTO RAND CLOCK DAYSAV MAN AUTO RAND CLOCK
MONTH MONTH
DATE DATE YEAR YEAR
SKIP SKIP
EVENT EVENT
MO TU WE TH FR SA SU MO TU WE TH FR SA SU AM AM PM PM
OK OK MODE MODE PROG PROG ON/OFF ON/OFF
Fig. Fig.
11 11
ON ON OFF LOC DUSK DAWN OFF LOC DUSK DAWN
DAYSAV MAN AUTO RAND CLOCK DAYSAV MAN AUTO RAND CLOCK
MONTH MONTH DATE DATE YEAR YEAR
SKIP SKIP
EVENT EVENT
MO TU WE TH FR SA SU MO TU WE TH FR SA SU AM AM PM PM
OK OK MODE MODE PROG PROG ON/OFF ON/OFF
Fig. Fig.
12 12