Flexible Zone; Advice On Using Cookware; Warnings; Consisting Of Two Independent Zones - NEFF T D.3 Serie Instrucciones De Uso

Frying** (150-200 g per serving with 1-2 l of oil)
Frozen foods (e.g., French fries, chicken nuggets)
Frozen croquettes
Meat (e.g., chicken pieces)
Fish, in breadcrumbs or batter
Greens, mushrooms, in breadcrumbs or batter (e.g., baby mushrooms)
Confectionery products (e.g., fritters, fruit in batter)
* Uncovered cooking
** Uncovered
*** Turn frequently

Flexible zone

This may be used as a single zone or two individual zones
depending on the cooking needs in each situation.
It consists of 4 independently-controlled inductors. When the
flexible zone is working, only the zone covered by the cookware
is activated.

Advice on using cookware

To ensure that the cookware is detected and heat is distributed
evenly, correctly centre the cookware:

As one hotplate

Diameter less than or equal to 13 cm
Place the cookware on one of the four posi-
tions shown in the image.
Diameter greater than 13 cm
Place the cookware on one of the three
positions shown in the image.
If the cookware takes up more than one hot-
plate, place it at the top or bottom edge of
the flexible zone.
As two independent hotplates
The front and back hotplates, each with two
inductors, can be used independently by
selecting the necessary power for each
one. In this case, it is recommended to only
use one pan on each hotplate.

Warnings

When using cookware of a different size or made of a different
material, noise and vibrations that do not affect the correct
working of the zone may occur.
24
To obtain maximum power with the
Powerboost Function, place the
cookware in the centre of the flexi-
ble zone when used as a single hot-
plate.
Power level
8-9
7-8
6-7
6-7
6-7
4-5

Consisting of two independent zones

The flexible zone can be used normally as two independent
hotplates.
How to activate
See "adjusting the hotplate" section.
As one hotplate
To use the entire hotplate with all individual zones.
How to activate
The hob must be switched on.
Select one of the two hotplates of the flexible zone and set
1.
the power level.
Press the symbol. The indicator lights up.
ï
2.
The flexible zone has been activated.
Changing the power level
Change the power level using the symbols + or -.
To add more cookware
Select the hotplate in the flexible zone and then press the
symbol. New cookware will be detected and the previously-
selected power level will be maintained.
Note: If the cookware on the working hotplate is moved or
taken off, the hob will carry out an automatic search and will
maintain the previously-selected power level.
To deactivate
Set it to with the + or - symbols.
‹
Return to using two hotplates
Select one of the two hotplates of the flexible zone and set to
Note: When a hob is switched off and later switched on again,
the flexible zone will again be used as two hotplates.
Cooking time
fry one portion at a time
On hobs with more than one flexible
zone, it is not recommended to use
several zones at the same time for a
single pan.
ï
.
‹