The Timer; Keep Warm Function; To Activate; To Deactivate - NEFF T D.3 Serie Instrucciones De Uso

Note: The same cooking time can be automatically
programmed for the all the hotplates. The programmed time
passes independently for each of the hotplates.
The Basic settings chapter provides information on
automatically programming the cooking time.
Changing or cancelling the time
Selecting the hotplate . Press the
cooking time with the + or - symbols, or set to
Once the time has elapsed
The hotplate switches off. A warning signal sounds and
appears for 10 seconds in the time program function display.
The indicator on the hotplate lights up. Pressing the
x
symbol turns off the indicators and stops the beeping.
Notes
If cooking times have been programmed for various
■
hotplates, the time programming function always displays the
time for the selected hotplate.
Any cooking time can be programmed for up to 99 minutes.
■

The timer

The timer can be set for periods of up to 99 minutes. It is
independent of the other settings. This function does not
automatically switch off a hotplate.

Keep warm function

This function is used for melting chocolate or butter and for
keeping food warm.

To activate

Select the hotplate.
1.
Within the next 10 seconds, press the
2.
The indicator lights up.
–
The "keep warm" function will have been activated.

Cleaning lock function

Cleaning the control panel while the hob is switched on may
change the settings.
In order to avoid this, the hob has a cleaning lock function.
Press the symbol. A signal sounds. The
"
along with the symbol. The control panel is locked for
"

Automatic time limitation

If the hotplate remains in use for a long time and no changes
are made in the settings, the automatic time limitation function
is triggered.
The hotplate stops heating. The
heat indicator / flash alternately in the display.
œ •
The indicator goes out when any symbol is pressed. The
hotplate can now be reset.
When the automatic time function is used, it is governed by the
selected power level (from 1 to 10 hours).
26
3 symbol and change the
‹‹ .
‹‹
3
symbol.
–
indicator lights up
Ú
" , ‰ symbol and the residual
How to program
No hotplate should be selected.
Press the symbol.
3 ‹‹
1.
time program function display
Press the + or - symbols. The basic setting appears.
2.
+ symbol: 10 minutes.
- symbol: 5 minutes.
Set the desired time using the + or - symbols.
3.
After a few seconds, the time will start to elapse.
Changing or cancelling the time
Press the 3 symbol several times until the
up. Change the time or set it to
Once the time has elapsed
A warning signal sounds.
function display. After 10 seconds the indicators turn off.
Pressing the symbol turns off the indicators and stops the
3
beeping.

To deactivate

Select the desired hotplate.
1.
Press the – symbol.
2.
The indicator disappears.
–
The hotplate turns off and the residual heat indicator appears.
35 seconds. The control panel surface can now be cleaned
without the risk of changing the settings.
Note: The lock does not affect the main switch. The hob may
be switched off when desired.
and the symbol are shown in the
W
W indicator lights
‹‹ with the + or - symbols.
‹‹ is displayed on the time program