Toyotomi Zibro LC-132 Instrucciones De Uso página 19

PROGRAMMING THE WEEKLY TIMER
L
 N 
Make sure the heater is connected to the mains and not burning. Press the timer-
key . Also make sure the time and day are set correctly. Choose the day you
would like to program by pressing the adjustment keys N. Press the adjustment
key M to increase the day by one step and press the key N to decrease the day.
Press extension/day/set  to select the desired day. The display shows:
With the adjustment keys M and N N you can choose between the programs P1,
P2 and P3. You can also choose the option Copy to copying the setting from one
day to another. Press extension/day/set  to select the displayed program.
Use the adjustment keys N to set the hour at which the heater must ignite. Press
the adjusment key M to increase the hour and the key N to decrease the hour.
Press extension/day/set  to select the right hour.
Then, use the adjustment keys N to set the minute. Press the adjustment key M
to increase the minute and the key N to decrease the minute. Press extension/
day/set  to select the right minute.
Use the adjustment keys N to set the hour at which the heater must shutt off.
Press the adjusment key M to increase the hour and the key N to decrease the
hour.
Press extension/day/set  to select the right hour.
Then, use the adjustment keys N to set the minute. Press the adjustment key M
to increase the minute and the key N to decrease the minute. Press extension/
day/set  to select the right minute.
The settings for program 1 for Monday are programmed and the display shows
SET for 3 seconds.
After 3 seconds choose another day or end the setting mode by pressing timer.
Press the "timer" key  to exit the weekly timer setting mode and return to the
time and a day of the week display. Timer lamp turns off.
4
7