Copyright Protection; Delivery Scope And Transport Inspection; Unpacking; Disposal Of The Packaging - CASO DESIGN IceChef Pro Manual Del Usuario

13.3 Copyright protection

This document is copyright protected. Braukmann GmbH reserves all the rights, including
those for photomechanical reproduction, duplication and distribution using special
processes (e.g. data processing, data carriers, data networks), even partially.
Subject to content and technical changes.

13.4 Delivery scope and transport inspection

As a rule, the IceChef Pro is delivered with the following components:
 IceChef Pro
► Examine the shipment for its completeness and for any visible damages.
► Immediately notify the carrier, the insurance and the supplier about any incomplete
shipment or damages as a result of inadequate packaging or due to transportation.

13.5 Unpacking

Unpack your ice maker as follows:
 Take out the ice maker from the box and remove the interior and exterior packaging.
 Remove the tapes for fixing the ice scoop and ice basket.
 Before using your ice maker for the first time, thoroughly clean the water reservoir and
the ice basket as well as the ice shovel (see chapter Cleaning and Maintenance).
 Clean the interior of the machine with water. Open the drain cap on the front bottom
side to drain out the water from the ice maker.

13.6 Disposal of the packaging

The packaging protects the device against damages during transit. The packaging
materials are selected in accordance with environmentally compatible and recycling-
related points of view and can therefore be recycled.
Returning the packaging back to the material loop saves raw materials and reduces the
quantities of accumulated waste. Take any packaging materials that are no longer required
to "Green Dot" recycling collection points for disposal.
► If possible, keep the original packaging for the device for the duration of the guarantee
period of the device, in order that the device can be re-packaged properly in the event
of a guarantee claim.

13.7 Setup location requirements:

 In order to ensure the safe and trouble-free operation of the device, the setup location
must fulfil the following prerequisites:
 The device must be set up on a firm, flat, horizontal surface with sufficient load-bearing
capacity.
 Ice basket  Ice scoop  Operating Instructions
Please note
Please note
31