Cleaning Function; Troubleshooting; Security Advices - CASO DESIGN IceChef Pro Manual Del Usuario

16.3 Cleaning function

 Press clean button until the

17 Troubleshooting

This chapter provides you with important notices with regard to operating the device.
Observe the following notices to avoid dangers and damages:

17.1 Security advices

ATTENTION
► Repairs of electrical appliances must be carried out by qualified personnel who are
trained by the manufacturer.
► Repairs performed by untrained persons may result in considerable hazards for the
user and damage the machine.
17.2 Troubleshooting
Problem
indicator
lights up.
indicator
lights up
Ice cubes stick
together.
Ice making cycle
is normal but no
ice formed.
Possible cause
Lack of water.
Ice is full in basket.
The ice making cycle is
too long.
Water temperature in
inner tank is too low.
Room temperature or
water temperature in
inner tank is too high.
Not enough cooling
agent in the coolant
reservoir or a part of the
electronics is defect.
indicator blinks. The device rinses with water.
Solution
Stop the ice maker and press "on/off"button
again to restart the unit.
Remove ice from ice basket.
Stop the ice maker and start it again when
the ice blocks are melt.
Replace the water. Temperature of water
recommended at 8-32°C.
The room temperature should be 5-40°,
water temperature should be 8-32°C.
Contact your customer service.
38