Dvd Audio Setting - Emerson LD190EM1 Manual Del Usuario

 DVD Audio Setting
Choose the appropriate audio settings for your equipment. It only affects
during the playback of DVD.
1
Press [SETUP] to display the main menu.
2
Use [Cursor K / L ] to select "DVD", then press [ENTER].
3
Use [Cursor s / B] to select "
ENTER/OK
4
Use [Cursor K / L ] to select the desired item, then press
[ENTER].
DRC (dynamic range control)
This function is available only on the discs which are
recorded in the Dolby Digital format.
ENTER/OK
ON : Compress the range between soft and loud
sounds.
OFF : No effects (original sound).
Setup Setup
Press "ENTER" key to move to DVD Setup.
", then press [ENTER].
AUDIO
DRC ON
DOWN SAMPLING ON
DOLBY DIGITAL BITSTREAM
(Default: ON)
AUDIO
DRC ON
DOWN SAMPLING ON
DOLBY DIGITAL BITSTREAM
Español
DOWN SAMPLING
This function is available only on digital outputting of a
disc recorded in 96kHz.
ENTER/OK
ON : When outputting in 48kHz.
OFF : When outputting the original sound.
Note:
• When playing back a 96 kHz disc with the copyright
protection or when ''Virtual Surround" is set to "1" or "2",
the sound will be down sampled at 48 kHz even if the
"DOWN SAMPLING" is set to "OFF".
Refer to "Virtual Surround" on page 43.
DOLBY DIGITAL
Set to "BITSTREAM" when this unit is connected to a
Dolby Digital decoder.
ENTER/OK
BITSTREAM : Outputs Dolby Digital signals.
PCM : Converts the Dolby Digital into PCM.
(2 channel)
5
Press [SETUP] to exit.
Français English
(Default: ON)
AUDIO
DRC ON
DOWN SAMPLING ON
DOLBY DIGITAL BITSTREAM
(Default: BITSTREAM)
AUDIO
DRC ON
DOWN SAMPLING ON
DOLBY DIGITAL BITSTREAM
45
EN