Publicidad
2X
4
3
5
2"
Installation Steps
3. Mark and drill holes in the floor to fix the pedestal
to the floor with hardware and screws (not supplied)
proper for the floor type installed. Make sure the screws
do not interfere with any pipes and will not puncture
any water supply or outlet pipes.
4. Place the pedestal in its designated location and
fasten it to the floor.
5. Insert the p-trap only about 2" into the prepared drain
outlet with 1 1/4" trap adapter and tighten the adapter
onto the PVC pipe. This is to leave room to attach the
drain to the trap.
6. Assemble all parts of the drain and install onto the
lavatory, including the drain tail pipe.
Test the lavatory for leaks around the drain at this point
and before installing it on the pedestal.
HANDLE WITH CARE TO AVOID DAMAGES AND SCRATCHES
TO THE SURFACE OF THE LAVATORY AND THE PEDESTAL.
5
6
LACAVA LLC
Publicidad
