Glacier bay 67257W-0008D2 Guía De Uso Y Mantenimiento página 5

Installation (continued)
3
Installing the faucet assembly
□
Place the faucet assembly (A) through the
selected hole in the sink or countertop.
□
On the underside of the sink or countertop,
slide the metal washer (B) between the
countertop and spacer (C) as shown in the
diagram below. Slide on the lock washer (D),
and tighten the nut (E) securely using a wrench.
NOTE: The spacer (C) only needs to be used if installing
onto a sink or countertop less than 1/2 in. thick. Otherwise,
it can be discarded.
B
A
C
D
E
4
Connecting the quick connect
adaptor and water line
□
Thread the quick connect adaptor (F) onto the
end of the faucet assembly (A) stud, and tighten
securely using a wrench.
□
Connect the 3/8 in. water line from the ltration
system by pushing the line into the quick
connect adaptor (F).
□
Pull down on the 3/8 in. line slightly to ensure
the quick connect tting has engaged.
5
Please contact 1-855-HD-GLACIER for further assistance.
A
F
3/8 in. Water line from
ltration system
HOMEDEPOT.COM/GLACIERBAY