Glacier bay 67257W-0108D2 Guía De Uso Y Mantenimiento página 5

Installation (continued)
4
Connecting the quick connect
adaptor and water line
□
Thread the quick connect adaptor (D) onto the
end of the faucet assembly (A) stud, and tighten
securely using a wrench.
□
Connect the 3/8 in. water line from the ltration
system by pushing the line into the quick
connect adaptor (D).
□
Pull down on the 3/8 in. line slightly to ensure
the quick connect tting has engaged.
NOTE: In this installation the angled barbed connectors
are not used.
3/8 in. Water
line from
ltration system
A
D
5
Connecting the supply lines
NOTE: This option is only used in a Reverse Osmosis
system. Do not use 1/4" and 3/8" barbs in normal
installation. They do not need to be capped or altered.
□
If a drain line is required to run through the
faucet's integral air gap for a reverse osmosis
(RO) system, connect the 1/4 in. drain line from
the unit to the smaller barb on the the bottom of
the faucet assembly (A). Connect the 3/8 in. line
from the faucet assembly (A) to the drain. This
drain line works by gravity. Make it as short and
straight as possible, with no dips or loops.
1/4 in. Inlet Tube
Sink
5
Please contact 1-855-HD-GLACIER for further assistance.
A
3/8 in. Outlet Tube
HOMEDEPOT.COM/GLACIERBAY