Technical Data; Limited Warranty - GreenWorks Pro GCS80450 Manual Del Operador

Problem Possible cause
The machine does
not start. The chain brake is
engaged.
The machine and
battery are not
connected correct-
ly.
The battery level
is low.
The lock out but-
ton and the trigger
are not pushed at
the same time.
The battery is too
hot or too cold.
The motor runs,
The machine is in
but the chain does
the protection
not cut correctly,
mode to protect
or the motor stops
the PCB.
after around 3 sec-
onds.
The battery is not
charged.
The chain is not
lubricated.
Incorrect battery
storage tempera-
ture
13

TECHNICAL DATA

Voltage
No load speed
Guide bar length
Chain pitch
Chain gauge
English
Solution
Pull the chain
brake in the direc-
tion of the user to
disengage it.
Make sure that the
battery release
button clicks when
you install the bat-
tery pack.
Charge the battery
pack.
1. Push the lock-
out button and
hold it.
2. Push the trig-
ger to start the
machine.
Refer to battery
and charger man-
ual.
Release the trigger
and start the ma-
chine again. Do
not force the ma-
chine to cut.
Charge the battery.
Refer to the bat-
tery and charger
manual for correct
charging proce-
dures.
Lubricate the
chain to decrease
the friction. Do
not let the guide
bar and the chain
operate without
sufficient oil.
Cool the battery
pack until it de-
creases to the am-
bient temperature.
80 V DC
34.5 ft/s (10.5 m/s)
18'' (458 mm)
3/8" (9.5 mm)
0.05" (1.27 mm)
Drive links
Chain oil capacity
Weight (without battery
pack)
Chain
Guide bar
14

LIMITED WARRANTY

BATTERIE • GARANTÍA PARA
HERRAMIENTAS Y BATERÍAS
Greenworks hereby warranties this product, to the original
purchaser with proof of purchase, for a period of four (4)
years against defects in materials, parts or workmanship.
Greenworks, at its own discretion will repair or replace any
and all parts found to be defective, through normal use, free
of charge to the customer. This warranty is valid only for
units which have been used for personal use that have not
been hired or rented for industrial/commercial use, and that
have been maintained in accordance with the instructions in
the owners' manual supplied with the product from new.
ITEMS NOT COVERED BY WARRANTY:
1. Any part that has become inoperative due to misuse,
commercial use, abuse, neglect, accident, improper
maintenance, or alteration; or
2. The unit, if it has not been operated and/or maintained in
accordance with the owner's manual; or
3. Normal wear, except as noted below;
4. Routine maintenance items such as lubricants, blade
sharpening;
5. Normal deterioration of the exterior finish due to use or
exposure.
HELPLINE:
Warranty service is available by calling our toll-free helpline,
at 1-855-345-3934.
TRANSPORTATION CHARGES:
Transportation charges for the movement of any power
equipment unit or attachment are the responsibility of the
purchaser. It is the purchaser's responsibility to pay
transportation charges for any part submitted for replacement
under this warranty unless such return is requested in writing
by Greenworks.
15
62
6 oz (180 ml)
11 lbs (5 kg)
91P062X
180SDEA041
GARANTIE OUTIL &
EN