Placing The Unit; Getting Started - Blueair Classic 500 Serie Manual De Usuario

Warning: Changes or modifications to this unit not expressly approved by the party responsible
for compliance could void the user's authority to operate the equipment.
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital
device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable
protection against harmful interference in a residential installation. This equipment generates,
uses and can radiate radio frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular installation. If this equip-
ment does cause harmful interference to radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged to try to correct the interference by one or
more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is con-
nected.
• Consult the dealer or an experienced radio/TV technician for help.
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1) this device may not cause harmful interference, and
(2) this device must accept any interference received, including interference that may cause undesired
operation.
This device complies with Industry Canada licence-exempt RSS standard(s). Operation is subject
to the following two conditions: (1) this device may not cause interference, and (2) this device must
accept any interference, including interference that may cause undesired operation of the device.
This Class B digital apparatus complies with Canadian ICES-003.
FCC RF Radiation Exposure Statement Caution: This Transmitter must be installed to provide a separation
distance of at least 20 cm from all persons.
FCC ID: 2AEX3-5XXZ-CC Classic 500
IC ID: 20267-505 Classic 500
6
FCC ID: 2AEX3-6XXZ-CC Classic 600
IC ID: 20267-605 Classic 600

Placing the unit

Place the unit in a location where air can cir-
culate freely in, out and around the unit.
Do not place the unit closer than 4" (10 cm)
4 ins
from another object.
10 cm
Do not place the unit directly on or against
soft furnishings such as bedding or linen.

Getting started

Connecting your air purifier - 680i, 605 and 505
Follow the instructions below to connect your air purifier to your Blueair Friend mobile app. You can
then enable remote control.
Step 1
Plug the fixed power cable into a grounded
wall outlet. If you have a unit with a remov-
able power cable, then plug the cable firmly
and completely into the recessed power
cable socket located at the bottom of the
unit before plugging the other end of the
power cable into a grounded wall outlet.
Open the flip-up lid and press the airflow speed touch button. When the Wi-Fi symbol starts to blink,
the air purifier can be paired with the Blueair Friend mobile app.
Step 2
Download the Blueair Friend mobile app to your smartphone from your app store (Apple App Store
or Google Play).
Step 3
Connect your unit to your Blueair Friend mobile app. Start the app and follow the instructions.
After connecting your air purifier to the Blueair Friend mobile app, you can use the app to control the
unit remotely and adjust settings.
Do not place the unit near sources of heat,
such as radiators, fireplaces or ovens.
Do not place the unit near wet areas, such
as bathrooms or laundry rooms where it
may come into contact with water.
Do not place the unit outdoors
Blinking
Wi-Fi
FILTER
Blinking
PM 2.5
Wi-Fi FILTER AUTO VOC
7